Newbie 21' scarab build
New here on the forum. I had a nice turn key 86 chapparrel with a 454mpi but sold it like a idiot right before boating season to buy this 89 21' scarab excel. I was told all it needed was a motor, (sb350) but now after pulling things apart I found it needed a lot more. I wanted to do something different than a 350 so I bought a 5.3 outta a 2002 suburban. there gen 3 ls based engines that put out good power i thought it would be cool in a boat.
here some pictures, the boat looks horrible i think. the guy i bought it from was obsessed with stickers and spray paint [IMG]http://i47.photobucket.com/albums/f1...d/DSCN0118.jpg[/IMG] i cant tell if the swim platform is factory, if it is shame on wellcraft..... its coming off http://i47.photobucket.com/albums/f1...d/DSCN0117.jpg inside looks pretty good http://i47.photobucket.com/albums/f1...d/DSCN0110.jpg here u see where the sticker freak left his work http://i47.photobucket.com/albums/f1...d/DSCN0147.jpg old engine http://i47.photobucket.com/albums/f1...d/DSCN0113.jpg new engine http://i47.photobucket.com/albums/f1...1495744893.jpg got bottom end together and painted http://i47.photobucket.com/albums/f1...d/DSCN0146.jpg valve job and comp cams spring kit http://i47.photobucket.com/albums/f1...d/DSCN0144.jpg |
Good progress bud, keep us updated
|
That's gonna fly when you get it done. There is a lot of power potential in the ls motors. Looks like a fun project. Im in the same boat just finishing up a project that "only needed a motor". Somehow I don't believe the words "upkeep" or "maintenance" were in the previous owners vocabulary.
|
Welcome aboard!
|
Sweet project. Subscribed.
|
Good engine choice. What manifolds do you plan on using?
|
Thanks every one!
Originally Posted by bdubs
(Post 3946232)
Good engine choice. What manifolds do you plan on using?
made some progress got boat apart and found the gimble housing was trashed so had to pull that off the studs through the transom were dust they were corroded so bad. the housing corroded and expanded squeezing the ply wood together. the wood is still solid so I think im ok but im gonna have to do some filling to make smooth and even so the big oring will seal. lotta work I wasn't expecting. I did get lucky though and found a parts boat for 50 bucks! has a nice lower unit on it. il get some pics up tomorrow. |
Welcome, That will be a nice little hot rod when you get it all together. I will look forward to your progress. Randy
|
got motor out and found the steering arm had so much play idk how the guy could even drive it. I could literally move it 2 inches back and forth.
http://i47.photobucket.com/albums/f1...d/DSCN0114.jpg here all the other problems. the corrosion squeezed the transom together http://i47.photobucket.com/albums/f1...d/DSCN0151.jpg http://i47.photobucket.com/albums/f1...d/DSCN0150.jpg not really sure what to do about this, my body shop friend says fill it with some fiberglass bondo called dyna glass? does that sound ok? http://i47.photobucket.com/albums/f1...d/DSCN0148.jpg boat looks much better with out the home maid swim platform. http://i47.photobucket.com/albums/f1...d/DSCN0149.jpg here the parts boat I got for 50 bucks! I would like to put a bravo on it but I just don't have the money. plus this things gotta be done by july 20th!! http://i47.photobucket.com/albums/f1...192417_121.jpg |
any updates? I've got an 89 21 excel as well so I'm very interested to see how this works out for you.
|
All times are GMT -5. The time now is 09:46 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.