Offshoreonly.com - Post photo's of your bilge.

Page 4 of 8

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Restorations & Upgrades (https://www.offshoreonly.com/forums/restorations-upgrades-285/)

- - Post photo's of your bilge. (https://www.offshoreonly.com/forums/restorations-upgrades/299228-post-photos-your-bilge.html)

POWERPLAY J

07-16-2013 10:28 AM

Some real nice pics being posted. Diggin it!

rvander68

07-16-2013 11:47 AM

Quote:

Originally Posted by sdg0080 (Post 3959408)

hey you have a post any where showing your entire boat? I love that engine set up. where did you get those stacks?

Thanks....I detail the setup here: http://www.offshoreonly.com/forums/c...r-project.html

88bullet

07-16-2013 12:54 PM

all you guys have some cool sh!t going on!!!

Sunrocket24

07-16-2013 02:46 PM

Quote:

Originally Posted by POWERPLAY J (Post 3959278)

Might paint it this week. Just got it back from getting tails made. If you look close at the pic you can see the Duratec primer. I have a **** load of before and during pics. Fill holes, cut holes, grind this, sand that blah blah blah LOL. I still have a bit of rigging to attend to in the pics you posted and a ton of cleaning.

Thanks

Nice! Can't wait to see the new paint job!

POWERPLAY J

07-16-2013 03:22 PM

Quote:

Originally Posted by Sunrocket24 (Post 3959773)

Nice! Can't wait to see the new paint job!

Its a go boat not a show boat lol. It's going to look like the pic you have. No colors, no vinyl. All white. :-)

POWERPLAY J

07-16-2013 03:24 PM

Quote:

Originally Posted by 88bullet (Post 3959710)

all you guys have some cool sh!t going on!!!

Agree! It is nice to see the results of good work.

onesickpantera

07-16-2013 03:34 PM

This is the only one I have on this computer. Pantera green and black!

http://i149.photobucket.com/albums/s...pscbd2add9.jpg

Here's a before and after

http://i149.photobucket.com/albums/s...eandAfter2.jpg

4bus	07-16-2013 03:38 PM

3 Attachment(s)

Wow does this thread make my bilge look plain! Oh, and FYI- Don't put Arties mom in your bilge, he gets pissed

[ATTACH=CONFIG]504514[/ATTACH][ATTACH=CONFIG]504515[/ATTACH][ATTACH=CONFIG]504516[/ATTACH]

onesickpantera

07-16-2013 03:40 PM

Quote:

Originally Posted by 88bullet (Post 3959330)

[ATTACH=CONFIG]504432[/ATTACH][ATTACH=CONFIG]504433[/ATTACH][ATTACH=CONFIG]504434[/ATTACH][ATTACH=CONFIG]504435[/ATTACH][ATTACH=CONFIG]504436[/ATTACH][ATTACH=CONFIG]504437[/ATTACH][ATTACH=CONFIG]504438[/ATTACH][ATTACH=CONFIG]504439[/ATTACH]

here are some of the boats i did the last couple years. last pic is my bilge.

Nice work!

POWERPLAY J

07-16-2013 07:07 PM

Quote:

Originally Posted by Randy Nielsen (Post 3959350)

I like those steps across the front with the strainers built in that way, I need to do something similar. Looks great post some pics when your done also please. Randy

I have crawled through a ton of boats and a few Poweplays. I have never seen the same material they used in mine. It is very nice stuff. There is a center stringer that runs the length of the boat. Hard to see in pics but the strainers are mounted a half inch above the step plates. I still have your # and can txt you pics when I get a chance. Going out to work on boat tomorrow. Need to get it painted and assembled, I am a month and a half behind haha.

Great thread. Hope it goes on for a while. Carter and Bullet do some sweet work!!!

All times are GMT -5. The time now is 03:32 PM.

Page 4 of 8

« First

Last »

Show 40 post(s) from this thread on one page