Thankyou for the nice comments :)

Thank you for your to kind comments :)

Or as we say in Sweden: Tack för dina snälla kommentarer :) :D

A quick test to see if everything fits and also to make a quick template for the motor mounts
[ATTACH=CONFIG]511477[/ATTACH] [ATTACH=CONFIG]511478[/ATTACH]

It’s kind of a tight fit but it will work fine :)
[ATTACH=CONFIG]511479[/ATTACH] [ATTACH=CONFIG]511480[/ATTACH]

Finally a "quick and dirty" template for the motor mounts :D
[ATTACH=CONFIG]511481[/ATTACH]

Wow you guys sure are making great progress and not wasting any time!!

You’re to kind; all of these pics are taken over a couple of years. So we are not making that good progress as it is a hobby project. So most of the time there’s just a few hours after work here and there we have time to put it together.

The plan is to be ready for launch next summer :)

A few pictures from when we tried out the mockup motor mounts :)

Moving the boat from our painting facilities to the workshop on a nice wintery day :) Kind of strange that I miss the winter season ;)
[ATTACH=CONFIG]511499[/ATTACH] [ATTACH=CONFIG]511500[/ATTACH]

Inside our workshop :)
[ATTACH=CONFIG]511501[/ATTACH] [ATTACH=CONFIG]511502[/ATTACH]

Again a tight fit but it will work :)
[ATTACH=CONFIG]511506[/ATTACH] [ATTACH=CONFIG]511507[/ATTACH]

[ATTACH=CONFIG]511505[/ATTACH]

Some pics from the installation of the stand off boxes and steering :)
[ATTACH=CONFIG]511635[/ATTACH] [ATTACH=CONFIG]511636[/ATTACH]

[ATTACH=CONFIG]511637[/ATTACH] [ATTACH=CONFIG]511638[/ATTACH]

Just a mini update :D

I am having trouble to come up wirh a design for the instrumentation :(
This is the second version of the "panels" :)
[ATTACH=CONFIG]511656[/ATTACH]

Installed trim tabs from Dana :)
[ATTACH=CONFIG]511793[/ATTACH]

We have also manufactured a pair of water pump covers :)
[ATTACH=CONFIG]511794[/ATTACH]