ahhh the joys of being glassdave . . . . ok its almost five and i have to get up in a half hour lol . . . back to the grind . . . literally :D. more to add later . . . . . zzzzzzzzzz


https://cimg2.ibsrv.net/gimg/www.off...0c7f6be46c.jpg

resto-MOD :D . . . . i have cut and ground a lot on this thing and its interesting the different lives its had. would love to see a pic tthe day it was new

by the way that mask I'm wearing above is a forced air respirator i made out of an old CPAP machine. Works great except i wanna fall asleep about five minutes after i put it on :D lol . . . . (that could explain a lot)

Artwork dave, wish i could do a quarter of it.

Are those baltec panels, another brand or did you build them on site.
The pictures make the tape/ tabbing look like 0-90 material, but im guessing its bi ax
and what im seeing is the stitching.

Dont leave out the materials your using and why ! hows the rest of us supposed to learn ?

no i make panels on site to suit what i need. The tabbing is all 45/45 on just about everything i do except transoms or the occasional stringer i will alternate in 0/90 to give me four axis. Using 0/90 over hard straight angles leaves one full axis useless and simply along for the ride doing nothing for the laminate.

yoh yoh!!! are you awake from your slumber glassdave? :poopoo:

i took a cat nap . . . . :D

long nap

:drool1: