|
Originally Posted by cheech
(Post 4709890)
This thing ready for the Champagne bottle yet? :drink: :drool1:
had its dock neighbor out of the way the other day so i could see the profile of the bustle. :cool:https://cimg9.ibsrv.net/gimg/www.off...bb09396727.jpg https://cimg5.ibsrv.net/gimg/www.off...3d2f25a217.jpg https://cimg9.ibsrv.net/gimg/www.off...38052db107.jpg |
decided to make all new seats . . . Al said the oLd ones chaffed and i needed new office furnature . . .
i pulled a mold off a plug i made https://cimg1.ibsrv.net/gimg/www.off...4451852e3e.jpg https://cimg2.ibsrv.net/gimg/www.off...59f21a4e69.jpg https://cimg3.ibsrv.net/gimg/www.off...55c1c35dff.jpg https://cimg7.ibsrv.net/gimg/www.off...9f852a0554.jpg https://cimg8.ibsrv.net/gimg/www.off...e41e282cea.jpg |
GlassDave,
Looking great and taking shape nicely too. Thank you for sharing the updates! Jon |
Lines flow nicely.
|
Originally Posted by glassdave
(Post 4698742)
also had some billit inner transom assembly plates made and while they were at it i had them throw down the AK Racing logo (that i stole from his website without permission)
https://cimg3.ibsrv.net/gimg/www.off...1854a650aa.jpg https://cimg5.ibsrv.net/gimg/www.off...b4553adb23.jpg |
Are you welding the drives to those plates???.... What happened to the holes while they were on the CNC?
|
Originally Posted by frickstyle
(Post 4710024)
Are you welding the drives to those plates???.... What happened to the holes while they were on the CNC?
https://cimg9.ibsrv.net/gimg/www.off...9759db0277.jpg ? Set and cut both at once, super accurate and parallel. Waggs did them in Mentor, used them on FatBoy for the first time works great. |
Originally Posted by payuppsucker
(Post 4709981)
Why would you want to put that clowns logo on your boat?:lolhit:
|
Originally Posted by glassdave
(Post 4710051)
Those are just the inner transom plates. I had them CnC cut to the same profile as the boxes Al has but i wanted to do the bolt holes because they were not standard SSM. There was no real eeasy way to accurately map them out for cutting but to do the manually is a breeze. Did you see the transom jig i have for the #5's nowhttps://cimg7.ibsrv.net/gimg/www.off...4a002efd09.jpg
https://cimg9.ibsrv.net/gimg/www.off...9759db0277.jpg ? Set and cut both at once, super accurate and parallel. Waggs did them in Mentor, used them on FatBoy for the first time works great. |
Originally Posted by glassdave
(Post 4710052)
I didnt . . . I put that clowns name on that clowns boat . . . . :D
Wonder who Al will hire to build the motors? |
| All times are GMT -5. The time now is 03:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.