32 Active Cat resto-mod
#192
All those pieces a few pages back are all glassed in and final faired. The dash is pretty cool and with the center mounted helm reminds me a lot of the Starship Enterprise . . . lots of room for LOTS of gauges
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#193
Also did a mock up for a windshield riser that i had in mind to get rid of the old flat one to also allow the seats/helm to be moved inboard. Along with the riser we decided to open up the vents and do away with the louvers,
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#194
made a mold off the mock up to allow me to make a large fairing section, I feel its better in the long run doing it like this because it provides a better final part even though its a one time use mold. I call the process "quick an dirty" molding, its a bit more up front effort but the final part is cleaner and easier to adapt then any free lofted part.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#195
some initial fitting of the finished part, Fits good and has a good arc side to side. This part was made about six inches taller the the final shape/heighth will be. This is done so the bottom edge where the windscreen is going to sit is a prefect fit also provides a nice lip for it all to attach to. . . . When the windscreen is on it will kinda flow with/around that pod in the center of the dash top. . . .
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )