https://cimg8.ibsrv.net/gimg/www.off...5f66cec86.jpeg
https://cimg9.ibsrv.net/gimg/www.off...a7993b083.jpeg
https://cimg0.ibsrv.net/gimg/www.off...e2318ef2f.jpeg
https://cimg1.ibsrv.net/gimg/www.off...1e3f73c5a.jpeg
https://cimg2.ibsrv.net/gimg/www.off...fbf8317e9.jpeg
https://cimg3.ibsrv.net/gimg/www.off...2c0d9f8f1.jpeg

Did you have the thermostat housing powdercoated or is that paint? I'm trying to find a powder that matches the Merc blue.

Impressive work and cool build! Brings back a lot of memories when I did my 25 outlaw. That’ll be a fun boat when your done!

its paint i found this and it seems to match good. Be sure to pick up the metal cast base coat too!

https://cimg7.ibsrv.net/gimg/www.off...505071d39.jpeg

hopefully, i am excited to get it on the water !

https://cimg4.ibsrv.net/gimg/www.off...6807b7271.jpeg
https://cimg6.ibsrv.net/gimg/www.off...cff1409c2.jpeg

Pdm in action

Beautiful work and attention to details!
But I agree with Delsol, Be careful, a friend had a built 540 in his and that might have been the 2nd scariest ride I've been in over 80.

Yeah I have heard this a few times so I be careful up top but I am not the person to ride on the edge all the time. I bet when I pull the logs most of the engine time will be spent at idle, putting a round while I smoke a cigar :). Incase I do get bit by the speed bug I made the wiring modular so I can lift and move it to another large hull if needed.

-Nick

https://cimg1.ibsrv.net/gimg/www.off...28f6e921c.jpeg
https://cimg2.ibsrv.net/gimg/www.off...cf3085f38.jpeg
https://cimg3.ibsrv.net/gimg/www.off...43a8028af.jpeg
https://cimg4.ibsrv.net/gimg/www.off...c9f4971f8.jpeg
https://cimg5.ibsrv.net/gimg/www.off...60c55cc45.jpeg
https://cimg6.ibsrv.net/gimg/www.off...a694bebec.jpeg
https://cimg7.ibsrv.net/gimg/www.off...e86f6a161.jpeg
https://cimg8.ibsrv.net/gimg/www.off...dd3450eaa.jpeg
https://cimg9.ibsrv.net/gimg/www.off...e7c9e36d9.jpeg