Re-do on engine hatches...
 

Gearing up to re-do the hatches on my boat... I would like to see what some of you have done with yours.... wanting to raise the front portion for more head/ neck support and add a little color. This is what I'm starting with, 10 Meter Fountain. ( if yal' are wondering )


https://cimg4.ibsrv.net/gimg/www.off...6957c0d084.jpg

I did scoops but also raised head rests.
https://cimg8.ibsrv.net/gimg/www.off...83ae293f31.jpg

Alum Construction. You can kind of see the built in headrests.
https://cimg1.ibsrv.net/gimg/www.off...1a05b8b2f0.jpg

Previously...
https://cimg8.ibsrv.net/gimg/www.off...1c3effeccd.jpg
https://cimg7.ibsrv.net/gimg/www.off...fe14b882fd.jpg

after

Thriller,,, that is a clean job, I like the Fountain emblem and the raised head supports.. thanks..

XT Innovations did mine as well. You will be happy if you choose them.