hydraulic lines securing / mounts
#1
Registered
Thread Starter
hydraulic lines securing / mounts
Getting ready to install my hydraulic helm and was curious what everyone is using to secure / mount their hydraulic lines to and from the helm ? Thanks In advance.
-Nick
-Nick
#2
cushion clamps, lots and lots of cushion clamps, evenly spaced all screw heads pointing the same direction, hours and hours of fun.
start with a big loosely hung clamp first and route all your hoses and electrical so you like it, then do a 1 for 1 swap to a smaller size that secures everything, work out the wiggles as your swapping them out so it all looks nice.
#3
Registered
Thread Starter
yeah those might be the best option. I found these from hardin marine https://www.hardin-marine.com/p-1154...ose-clamp.aspx but they only offer 3 hose version .