fountain 10 meter race boat
Platinum Member
01-04-2023, 09:48 AM
#22
Gold Member
Gold MemberThread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
01-04-2023, 10:23 AM
#23
most after market cylinder heads have raised exhaust ports. Brodix makes a race rite head that keeps the exhaust port in the stock location. i think Edelbrock heads are also stock location . the brodix bb2 heads have their ports raised .600. Luckly you dont have those or you would really be fuked .
01-04-2023, 11:14 AM
#24
Gold Member
Gold MemberThread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
most after market cylinder heads have raised exhaust ports. Brodix makes a race rite head that keeps the exhaust port in the stock location. i think Edelbrock heads are also stock location . the brodix bb2 heads have their ports raised .600. Luckly you dont have those or you would really be fuked .
For sure. i can always trim up a little into the deck. i have trim rings that should cover
01-04-2023, 11:16 AM
#25
Gold Member
Gold MemberThread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
most after market cylinder heads have raised exhaust ports. Brodix makes a race rite head that keeps the exhaust port in the stock location. i think Edelbrock heads are also stock location . the brodix bb2 heads have their ports raised .600. Luckly you dont have those or you would really be fuked .
The following users liked this post:
J-Bonz (05-20-2023)
