|
Originally Posted by Padraig
(Post 4934248)
Damm...Even the trailer looks new!
Padraig The trailer was a generic four winns So he metal worked it, smoothed the tube's gloss paint custom four winns decals Lowered it in the frame 2x3 tubing weld at correct angled. its ten ....not a touch of rust. I have big job to keep her as nice as he did |
Long 6 plus hrs today to Memphis
she pulled great and I burned a ****load of def but hey 16 in a 6.7 f250 stopped at the zoo buceess https://cimg2.ibsrv.net/gimg/www.off...da83086881.jpg https://cimg3.ibsrv.net/gimg/www.off...73f34c49e6.jpg |
Congratulations on the new to you boat. That boat and trailer looks real sharp. Looks good behind your f250 as well! You have a nice classic. Good luck with it!
|
Working a punch list
4 screws in bench seat need new holes and old one filled Flame arrestors cleaned Vacum Tightened all the lag bolts holding bunks on...several had backed out Need to replace aft bilge over board thru hull Its plastic and it getting chalky Get fuel, |
Recieved my stamped and official Survey report yesterday
really made me feel even more secure in the purchase. 10 pages of meticulous detail he left no stone unturned insurance guy is not going to like it, as its proof a nearly 40 year old boat is 9 out of 10 We need a page to add survey people Bartnett marine survey up state new york |
she got wet today
i had to float her so i could trailer empty weight for DMV and registration looks dammmmm good sitting still https://cimg1.ibsrv.net/gimg/www.off...66628a8c31.jpg |
Took some 80s tarnish off the cabinet door hardware
cast aluminum No chromed plastic Polished nice https://cimg9.ibsrv.net/gimg/www.off...520e664302.jpg |
Finally found the screws to remove the false bulkhead and viola ..a pump from Hong Kong vice China it is frozen up
New one arrived yesterday or late Saturday New hoses in bound Shoukd have it running like 88 soon Thinking either replace faded carpet or have it dyed Its in excellent condition, just color is aged https://cimg6.ibsrv.net/gimg/www.off...7b554b9ca2.jpg https://cimg8.ibsrv.net/gimg/www.off...ab929ecfce.jpg https://cimg0.ibsrv.net/gimg/www.off...19413a107a.jpg |
Originally Posted by powerboatr
(Post 4934297)
Long 6 plus hrs today to Memphis
she pulled great and I burned a ****load of def but hey 16 in a 6.7 f250 stopped at the zoo buceess https://cimg2.ibsrv.net/gimg/www.off...da83086881.jpg https://cimg3.ibsrv.net/gimg/www.off...73f34c49e6.jpg |
New thu hull for ice box
refurbished the ice box door inside panel New drain tube's inside Filled holes in cabinet mount Hopefully today it goes back in Re glued carpet. Vacumn 30 years of crap behind it Water pump tubing delayed.. Guess its a 20 mile run to Lowes to see if they have 1/2" tubing flexible stuff more pics coming Had a slow down My dad unexpectedly passed on the 20th been some turmoil . Mom lives next door New porta potty arrived 🤣 Its close to 10 lbs lighter than the 88 model |
My condolences. You've accomplished a lot on the boat already. Take good care of Mom and the Family.
https://cimg9.ibsrv.net/gimg/www.off...f6b07404d2.jpg |
Originally Posted by larslindroth
(Post 4935971)
My condolences. You've accomplished a lot on the boat already. Take good care of Mom and the Family.
https://cimg9.ibsrv.net/gimg/www.off...f6b07404d2.jpg very relaxing pic as well |
You're so very welcome.
|
I missed seeing that your Father passed. I am very sorry. Losing a Father is one of the hardest things that can happen to someone.
Padraig |
Mom is still here
sorry for confusion We have dad's ceremony tomorrow at a national cemetery Time marches on, however my winter maintenance list is growing Pull drives, all fluid changes, grease everything water pump impellers. spark plugs Fuel filters |
Hello- Can you share the link where you found that original datasheet? I remember seeing it a year or more ago and downloaded to my laptop, unfortunately the hard drive failed last month!
|
Originally Posted by BillT
(Post 4938687)
Hello- Can you share the link where you found that original datasheet? I remember seeing it a year or more ago and downloaded to my laptop, unfortunately the hard drive failed last month!
I have pdf of the booklets om my laptop Pm me your email I can send em |
The 261 Liberator, I am unable to pm as a new member with less than 10 posts, anyway you can attach a PDF to this thread?
|
Originally Posted by BillT
(Post 4938761)
The 261 Liberator, I am unable to pm as a new member with less than 10 posts, anyway you can attach a PDF to this thread?
Just find a dead thread and spam it to get your post count up. Thanks. Brad. |
Can you send me the pdf for the liberator 261 to
planeobill at gmail dot com |
Originally Posted by BillT
(Post 4938867)
Can you send me the pdf for the liberator 261 to
planeobill at gmail dot com these pics I have on my phone I will email the pdf stuff today https://cimg3.ibsrv.net/gimg/www.off...a7076e19f2.jpg https://cimg6.ibsrv.net/gimg/www.off...ac0f69ab9b.jpg https://cimg7.ibsrv.net/gimg/www.off...1cd9d4cfbd.jpg |
Thank you!
|
Originally Posted by BillT
(Post 4938892)
Thank you!
have a good one |
Originally Posted by powerboatr
(Post 4938894)
they are in you gmail box
have a good one |
The sheet that estimate speed 50 to 55 with twin 350s
I think was low My test run the day of the broke foot At 3k rpm gps read 42 I didn't use my phone gps Just noticed the garmin unit watching water depth and speed I cant wait to get her all serviced up and go see What she runs For the record... |
Bill this you tube
site is a libby that was for sale It has really good video of the bench seat https://cimg8.ibsrv.net/gimg/www.off...2498fd164f.jpg |
| All times are GMT -5. The time now is 06:58 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.