![]() |
the 26 Liberator was in a powerboat mag were Bob Teague test drove the boat I forget what power the test boat had Bob gave high praise on the performance and handeling with a statement about fit and finish could be better are something like that I believe it was somewhere around the early to mid 80's
|
Originally Posted by later
(Post 4933554)
the 26 Liberator was in a powerboat mag were Bob Teague test drove the boat I forget what power the test boat had Bob gave high praise on the performance and handeling with a statement about fit and finish could be better are something like that I believe it was somewhere around the early to mid 80's
It got ocean time often And in 88. Build quality was damm good One warranty item... One new seat skin, a tech poked a hole Doing warranty work🤣🤣🤣 |
You can do the SEI cobra to alpha conversion if you grenade a drive want it fixed quick & cheap. I did one on a 201 Liberator w/350. Believe it was less than $2,500 for the kit and a new drive with 3 year warranty. Quick shipping and decent instructions, didn't even lose a weekend of boating. Never had a problem after that, probably 200+ hard hours and still going.
|
Was watching some poker re runs on u tube last night
this was from river run a few weeks back Did not snap the air shot But he was keeping up with the pack air shot looked like mercruiser drives maybe https://cimg8.ibsrv.net/gimg/www.off...bad9d6573c.jpg |
last night on the www of videos
i saw a glimpse of a 261 that had been modified with a very sharp transom bracket and 2 merc 450 outboards. looked like it was factory it got me thinking if these old 350s and drives get ugly..i can have a nice transom mount made and strap on the mercs. gain a bit of back seat room as well |
Survey passed
surveyor was very pleased And only found one small area to fix, but not critical I thought he may talk me out of buying it.. He was very very impressed He said it looked 5 years old vice nearly 40 Transom was solid and only one small place of moisture indicating on meter Right in center. But it was extremely low One dividing bulkhead at fuel tank and water tank interface has a spot of delaminatiin where some fasteners were located. a few crazing areas near a mount for a hand rail made me feel good So in 8 hrs..weather permitting it will be in my hands to resume caretaker duties |
Congrats. Look forward following you guys' caretaking and adventures with this pretty boat.
|
I was always impressed with the sound of that boat
|
Cheesy pic..but at least I got it parked at hotel
long long day Spent over an hour with Joe. He sure Took great care of her https://cimg3.ibsrv.net/gimg/www.off...c7791a59b8.jpg |
Damm...Even the trailer looks new!
Padraig |
| All times are GMT -5. The time now is 07:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.