|
Originally Posted by Chris
(Post 3498128)
running 30 pitch bravo/4 blades.
i have played with 3 blade vs 4 blades on other boats, not this one but i always thought the 4 blade was a better all around prop... just my .02 |
Chris' boat got lots a power..
|
Originally Posted by martins custom marin
(Post 3505238)
steve im running a 24 labbed on mine and doing 73 on the limiter we can hook up and give it a try on your boat before you purchase one. cwc you might of had someone work on it that didnt know how to do it right. i had my normal prop guy (for the cheap stuff) check the pitch on a prop, he tweeked it and polished to a mirror finish absolutly beautiful but i lost 6 mph he polished the cup out of it. send it to another place I would recomend bblades or dans prop shop
|
Originally Posted by AIR TIME
(Post 3615090)
we had that happen one year in gerrys 46 turbine skater, we backed up from a card boat. poof prop came off 5 blade herring in 8 to 41 ft of water, depending on tide. but it was providence RI harbor:eekdrop:. you can't see a foot in front of you, under water. we had a diver look for it, but the mud was so deep. he thought it sunk under it. we tryed a metal detector with no luck. play time two months.:cartman:
|
Artie, while in Miami, I spoke with several very experienced riggers concerning your boat. They all stated, you've got to remove the hook in the hull.
Originally Posted by AIR TIME
(Post 3619356)
oops it was 8 to 14 ft water not 41:poopoo:, on my boat been thinking of trying a p5 trans lifting prop.
|
Originally Posted by Biggus
(Post 3627385)
Artie, while in Miami, I spoke with several very experienced riggers concerning your boat. They all stated, you've got to remove the hook in the hull.
|
Originally Posted by AIR TIME
(Post 3630974)
nono no its rocker hahaha. thanks buddy. yeh that looks like my next stop. factory has been no help with cg either, so I am going to skip that. no reaon to find mine, when the guys who built it never took or adjusted theres. anyone know if this is a copyed hull , splashed hull. if so maybe I can find the cg from them. Kurt did you mean rocker. I do have a guy who will give me a price on that. it should be about 4ft to 6ft of rocker thats from the factory. should bought that 05 sutphen.
|
oh with the hp I have a bravo is not the ansewer:lolhit:, KONRAD BABY its bigger, meaner, and shorter. if the guy with the 31 sutphen didn't recut for twins, I would of paid the 14 gs and stripped the saber of its power and sold it. I know its bottoms are straight, no hook no rocker, no pads, not even a step. but boy that new OUTERLIMITS 29 running 97 with a 525 and 4 or 5 steps is BAD AZZ. hope to run that with twice the hp:cartman:. later
|
Originally Posted by AIR TIME
(Post 3630980)
...boy that new OUTERLIMITS 29 running 97 with a 525 and 4 or 5 steps is BAD AZZ...
|
Originally Posted by Stormrider
(Post 3631013)
It's not running a 525. its a 600SC.
|
| All times are GMT -5. The time now is 03:22 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.