Originally Posted by REV-ON (Post 4931238)

Ok, so lets just say, I am bored today, my post is just in my opinion, and could definitely not be accurate, but here is my 2 cents.
The mold is the same for both the cyclone and offshore.
The "cyclone " badge was created for twin engine boats, exceeding 1000 hp.
If you look at the yellow boat for sale, on classifieds, you will see it is "Offshore" as that boat originally had twin 7.4,s.
There is most likely exceptions, but if you look deep enough I would bet, as some point there was a power replacement.

Originally Posted by RBeyer (Post 4930615)

The 28 Cyclone is narrower. It is 7' 6" when the web site was up it listed top speed as different also, with the Cyclone rated 100+