Motor Builder Help
 

I know I am entering sacred SBRT ground by requesting your assistance, but I was wondering any input some of you guys might have on a pair of motors built by Pat Musi there in the Jersey area. These are fresh motors dyno'd at 900 hp that are in a boat I am trying to buy. What do you think of his work and has anyone had work done by him before? I appreciate your input. By the way, I met a bunch of the SBRT group at the 2006 shootout at LOTO. We arranged for the lost child "ratman" to be delivered to you guys down there. Hope to have this new boat done by this year's event and the OSS championships there as well.


A little motor info, Merlin III tall deck blocks, Blower Shop polished 871 blower, JE Custom Pistons, Edelbrock Alum heads, Luniti Crank, Oliver Bullet Steel Rods, Crane cams and cam shafts, Isky lifters, holley 850 carbs, detuned with larger pulley to 2-4 lbs of boost (smaller pulley dyno'd at 894hp) Hoping to get some ideas for longevity, idle manners, I'd assume 92+ octane fuel, etc. The motors are said to be fresh (O Hours) in a 37 Stiletto Outerlimits.

Re: Motor Builder Help
 

musi worked on some crazy motors for some guys we knew, im sure jc and tantrum will chime in for ya... from what i know of he does real nce work, i think he is more of a car guy than a marine guy....

Re: Motor Builder Help
 

pics of wife will get you information... topless pics of wife will get you good information:evilb:

Re: Motor Builder Help
 

does that mean true info or just good info?

Re: Motor Builder Help
 

azz shots = true

Re: Motor Builder Help
 

thanks for the clarification.

Re: Motor Builder Help
 

I am confused, pics of you guys' wives, now that would not be anything new for anybody would it? Sorry for the bad humor, 10 degrees outside and buddies are leaving for Miami and I am staying, total B>>>>S>>>> hammer

Re: Motor Builder Help
 

he has a good rep in the drag racing world. not sure about the marine. Try JC Perf he knows him and Zul worked for him a little while

Re: Motor Builder Help
 

Pat does a decent job. I know of a 35 Cig that had his motors and had some issues but it's debatable whether or not he was the cause.

Re: Motor Builder Help
 

thanks for the input guys, shogren has pulled the motors out of the equation now, I think it always concerns people when you get up to that horsepower and you are paying 50k + for motors that you know nothing about, just my .02 and almost my 50K i guess. Did anyone know the 37 stiletto at shogren's that i was referencing, it supposedly came from the jersey area.

Re: Motor Builder Help
 

PM JCPERF... he knows it.

Here they are!
 

Team Shogren
www.chicagofountain.com
847-336-9037

Think they are going in our race boat for poker runs!!!!

It definately was in south Jersey at one point. I only saw it once though, at the NY Poker run 2 years ago.

2nd hand info ...his marine motors are above average...1st hand info...his drag motors...OFF THE CHARTS WICKED

you know nothing about nothing......:evilb: :evilb: :evilb:

except that the BEARS SUCK !!:evilb:

i could have you killed for such slander.....

how is the new baby?

hes doing very well.... thanks for asking..... tough part should be behind us.....

that is good to hear......do you know who the farther is yet?:evilb:

TTB. You must not have heard, with the acceptance of same sex marriages in Jersey, he now has two Daddy's!!!lol