Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   81 Scarab project from hell (https://www.offshoreonly.com/forums/scarab/115784-81-scarab-project-hell.html)

scottie150 06-06-2009 04:28 PM


Originally Posted by capone550 (Post 2882119)
Oh not really. I am gonna go to the local race track tonight. I asked the lady at the hotel if there was anything to do and she straight laughed at me.

My point exactly:D

I am around all weekend if you want to check it out.
509-953-6060

scottie150 06-07-2009 10:59 PM

Changed out both engine harnesses today, that sucked!!:angry-smiley-038: Spent a couple of hours tracing all the wires, and generally checking all the connections- got everything sorted out(after fixing all the stupid mistakes), went to light it off and I was still popping the circuit breakers. After scratching my head for a long while, and rechecking all the stuff I had already checked, I found the right ignition switch hot lead was shorting against the throttle cable housing causing it to short out. The good news is I found my electrical problem, the bad news is I now have to buy a new throttle cable and change it out. :violent-smiley-045:

Its always the last little sh!t that takes the longest.:lolhit:

Capone550- nice to meet you- thanks for the help!!

502ss 06-08-2009 08:02 AM


Originally Posted by scottie150 (Post 2882946)
Changed out both engine harnesses today, that sucked!!:angry-smiley-038: Spent a couple of hours tracing all the wires, and generally checking all the connections- got everything sorted out(after fixing all the stupid mistakes), went to light it off and I was still popping the circuit breakers. After scratching my head for a long while, and rechecking all the stuff I had already checked, I found the right ignition switch hot lead was shorting against the throttle cable housing causing it to short out. The good news is I found my electrical problem, the bad news is I now have to buy a new throttle cable and change it out. :violent-smiley-045:

Its always the last little sh!t that takes the longest.:lolhit:

Capone550- nice to meet you- thanks for the help!!

You have the same shifter/throttle setup as mine. What a pain in the a$$ to swap the cables out! I replaced my throttle cables last fall before I put the boat away and I was cursing and swearing the whole time!

At least you found the problem!

Good Luck! :drink:

areyouliving 06-08-2009 11:24 AM


Originally Posted by 502ss (Post 2883059)
You have the same shifter/throttle setup as mine. What a pain in the a$$ to swap the cables out! I replaced my throttle cables last fall before I put the boat away and I was cursing and swearing the whole time!

At least you found the problem!

Good Luck! :drink:

Which controls are you guys running? I'm about to buy a set of KIEKHAFERS or how ever you spell it.

jeff1000man 06-08-2009 11:35 AM

Havn't been on this thread in a while. Boat looks great.

Westcoast 06-08-2009 11:55 AM


Originally Posted by areyouliving (Post 2883253)
Which controls are you guys running? I'm about to buy a set of KIEKHAFERS or how ever you spell it.

thats what I run...Easy to make fit.

scottie150 06-08-2009 01:00 PM

Mine are Kiekhaefers- or basically Mercury racing performance shifter- you can get the parts from Merc.

Make sure if you buy one used that you get the ends that go into the shifter(the cable ends) because those little items are $pendy!!!

areyouliving 06-08-2009 01:42 PM

These are coming from the east coast so i have only seen a photo. What do they look like?

scottie150 06-08-2009 03:04 PM

1 Attachment(s)
Here are mine-

areyouliving 06-08-2009 03:33 PM

Damn Scottie thats a great looking console!


All times are GMT -5. The time now is 09:27 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.