Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   Larry Smith Viper? (https://www.offshoreonly.com/forums/scarab/124053-larry-smith-viper.html)

Clay Avedisian 03-05-2006 11:35 AM

Larry Smith Viper?
 
There is a 31 Scarab Viper in the classifieds that says it's built by Larry Smith. I've looked at a couple and they are Wellcraft built, I thought they were just like my Panther built by Wellcraft. The Wellcraft brochure shows in '91 the Viper model as a production boat. Anybody now any info on this or the boat? Thanks, Clay

BattleCry 03-06-2006 06:16 PM

Re: Larry Smith Viper?
 
I thought that there were two different versions of the Viper. There was a Wellcraft and a Larry Smith?

czy40p 04-12-2006 10:58 AM

Re: Larry Smith Viper?
 
I could not find much on that model either anybody no anything about it.

Clay Avedisian 04-13-2006 12:18 PM

Re: Larry Smith Viper?
 
I understand that Wellcraft produced boats have a vin that starts with WEL and Smith built ones I think are vins with TLS or something close to that. Clay

Luuk 05-20-2010 12:48 AM

So, what was the idea from Scarab when taking the Viper into production?

what is the different between the Viper and Panther?

737jetmech 05-20-2010 08:05 AM

Viper ...
 
My 1992 Viper hull # starts WEL ... I think its a Larry Smith design built by Wellcraft. Compare it to a Panther . Its hull is completely different . It has a small pad that runs 10 or so feet down the running surface.

jlg1971 06-01-2010 08:28 PM

Larry Smith Viper
 
Sorry for the response delay. It is a Larry Smith built in California. It has a GAB serial # where Wellcraft uses WELP. I only used Viper since it is more familiar. It is 31'1" with 8'6" beam and produced from 1990 to 1993. The race boats did not have a pad. The Wellcraft Panther agreat boat was produced till 1989 and is 30' with 8' beam.

jlg1971 06-01-2010 08:31 PM

There are some pre 1990 31 foot Smiths I also owned and raced a 1989. The 1994 has a much lighter and stronger balsa composite laminate where my 1989 was just kevlar.

jlg1971 06-01-2010 08:38 PM

As with most Larry Smiths they were designed and built to be race boats then the molds were shipped to Wellcraft to make production models.

bigboat28 07-09-2010 12:19 PM

How do you know if it is kevlar or not? The boat is a 86 Viper.

jlg1971 07-09-2010 07:43 PM


Originally Posted by bigboat28 (Post 3154777)
How do you know if it is kevlar or not? The boat is a 86 Viper.

I think you are refering to the 1989 I previously had which I qwned back in 1993. I asked Larry Smith the laminate. I appologize for causing confusion by calling my Smith a Viper. I only did so people would be familiar. Production version of this boat Wellcraft called a viper built between 1990 and 1993. My boat is a Larry Smith


All times are GMT -5. The time now is 09:35 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.