1997 Scarab SCS help please
 

Hey guys haven't posted in a while as the Scarab I was going to buy last summer fell thru.
Anyway,I have purchased a 1997 SCS with a 502 mag MPI in average condition.It needs some gelcoat work to be in the condition that I would like it to be and it will be going to the body shop this month.

The problem is the windshield/watershield is cracked and needs replaced but I just cannot seem to locate an OEM or even an aftermarket windshield.Any help would be greatly appreciated.

Re: 1997 Scarab SCS help please
 

You Can Make Your Own Out Of 3/8 Plexi And Use A Heat Gun To Form It Using The Old One As A Guide.

Epoxy The Crack And Sand Then Paint.

Pm Acrylico Here On The Board He Reproduce Them.

Also You Can Try To Call Marine Surplus In Sarasota.

Is This What You Are Looking For

Re: 1997 Scarab SCS help please
 

Yes that's the one.Great ideas that you have given me.Thank you.Will try to get one from acrylico or marine surplus.I would rather have a remanufactured windshield rather than repair mine as this boat is going thru a total resto.

Re: 1997 Scarab SCS help please
 

Does anyone know where i could find a windshield for a 1996 22 Scarab?? wellcraft has no idea? please any idea would be great.

Re: 1997 Scarab SCS help please
 

Send Acrylico a message.I would bet he has one in stock.He's going to make one for my boat.

Re: 1997 Scarab SCS help please
 

ok i will try that they have a website dont they? do you know how much they run?

Re: 1997 Scarab SCS help please
 

Dont know what the charge is for your boat but mine was $350.00 plus $100.00 shipping.

Just do a search on this forum for the guy and send him a personal message with your request.He'll get back to you asap as he did with me.

miscilanious wellcraft items
 

I have a 1996 22 ft. scarab I'm reconditioning anterior any help for wellcraft trim pieces such as steering wheel emblem, wellcraft logos, Scarab badges, coast guard load rating decal or any other wellcraft finish parts and decals. wellcraft dealers contacted so far have nothing. Any ideas would be greatly appreciated

Re: 1997 Scarab SCS help please
 

As I have found out myself with my SCS you won't get anything from wellcraft as they do not make our boats anymore.

You'll need to have trim pieces reconditioned or remade.Any sign or graphics place can make decals for you.What you can do also is design the decals to your liking and personlize your boat to your taste.Good luck.

Re: 1997 Scarab SCS help please
 

ya, but how could you make the coast gaurd load rating decal or the wellcraft emblums that go on both sides because those i dont know how you would make. here are some pictures of the stuff ive circles that im talking about down below
img.photobucket.com/albums/v668/Dirtbikerx69/scarablogo-1.jpg

img.photobucket.com/albums/v668/Dirtbikerx69/scarablogo.jpg