Is this normal ?
#1
Registered
Thread Starter
Join Date: Mar 2006
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Is this normal ?
I everone , i need to know if my trim tab measurement (inch travel ) are good or not.
There is a pic of my both trim tab at the higher position , like you can see i can't put in all the tab , i've still have 3 inch of travel between the tab and the cylinder.
Is it normal ?
There is a pic of my both trim tab at the higher position , like you can see i can't put in all the tab , i've still have 3 inch of travel between the tab and the cylinder.
Is it normal ?
#4
Registered
Join Date: Nov 2002
Location: SOUTHERN CALIFORNIA
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this normal ?
On mine, the metal finished part that has no paint on it goes al the way in! This part is clear of paint so the seals function with out damage!My boat is a differant model but tabs look similar and do go up more!
#7
Registered
Thread Starter
Join Date: Mar 2006
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this normal ?
Originally Posted by jeff32
umh? I heard you were missing 3 inches! but I was told it was not on the tabs!
#8
Registered
Thread Starter
Join Date: Mar 2006
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this normal ?
Originally Posted by Strip Poker 388
Mine look like they go down farther.Yours look like the mounted higher on the transom??
I can take some picks for you if ya need??
Rob
I can take some picks for you if ya need??
Rob
Thanks