MikeyFIN

A Ninja has a flatdeck with no middle support/stiffener as a 38KV . THEREFORE ? The Deck is terribly wavy AT LEAST on this example. I was quite dissapointed, no match for a 38KV deck or a Cig.
So apparently the deck is for that model only and the hull might be a stretch of a 30 panther or ?
I just went and took a look of a 1988 Kevlar Ninja... it has Bravos from factory and Mag 365īs plus Bennet trim tabs?!!!

la-zdunck

looks real good. any updates? i'd like to see the finished product.

muffin

Thanks for the pics....she looks GREAT!

northernoffshore

Some of those boats had outboards V8's others w/ big block package like yours. Great older boat, wave crusher definetly cooler than a big old scarab II or III. My guess is they Blocked off the 38' mold and built the ninja/raider models

963b

Sorry guys I havent done much with the boat lately. The guy doing the interior has jacked me around for 3 months,+ my X is back to gold digging. I'll post some more pics if I can get my seats back.

963b

I know this is an old thread and most of you probably dont care, but for all of you that commented here it finaly is! I struggled a bit this year with her(spunn all the bearings in port motor in 30 min. 3800RPM) but its all good ready for next year! Any one have any Ideas on graphics?

trc2

where's the pictures

963b

It's the pic below my name. I cant seem to be able to down size it for some reason. If you go to post #15 you can see a before and after.

GoCiggie31

Congrats and what a great project. Love the look, very classic.
Any update and btw, what paint process are you using?
GC

963b

We used Dupont Imron on it. This winter I'm wanting to get rid of the winshield and fab. a shorter, fiberglass one. I'm thinkin about having the whole boat wrapped. I love the black and white but there sure is a lot of black!