Need some interior help
 

Has anyone had to cut a hole in the bottom of their front bolsters to get the hardware out of them after taking the rear grabrails off. My hardware fell inside of the seat after taking the rails off. I have a 95 model 29?

not sure about your model but my 377 has the fold down table that comes out the back of the bolster; there are six #14 screws that attach it to the body of the bolster. this gives me access to the grabrail bolts and washers on the inside. good luck. - jeff

There is no way to get them out without cutting a hole. I have elected to let em ride! I don't want any extra holes. Tip , when you go to put them back together don't buy the stainless ones from the marine store they're just too expensive , I got a bag of 10 hilti ones@ home depot for what 2 of the ones were @ west marine.

Forgot the pic!