Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   84 Scarab Renovation (ongoing) (https://www.offshoreonly.com/forums/scarab/189048-84-scarab-renovation-ongoing.html)

502ss 06-16-2008 07:05 PM

84 Scarab Renovation (ongoing)
 
I have been saying for a while that I was going to start a thread showing the progress on my 84 scarab s-type renovation. I will post pictures as often as I can throughout the renovation.. Enjoy:D

502ss 06-16-2008 07:13 PM

3 Attachment(s)
Here it is! My 84 s-type with twin 502's and TRS Drives

scottie150 06-16-2008 11:57 PM

Very nice! What are you planning to do to it? Looks really clean in the pictures:D

Westcoast 06-17-2008 12:04 AM

Did the old owner do much fishing with that thing?

502ss 06-17-2008 04:55 AM


Originally Posted by Westcoast (Post 2592202)
Did the old owner do much fishing with that thing?

You like the rod holders? You can have them for real cheap money if you would like! :D

502ss 06-17-2008 04:56 AM


Originally Posted by scottie150 (Post 2592201)
Very nice! What are you planning to do to it? Looks really clean in the pictures:D

I have plenty planned....Stay tuned!

502ss 06-17-2008 05:01 AM

1 Attachment(s)
The instrumentation is in decent shape, all the switches need to be replaced and the wiring has some ghosts! When I took it for a test drive alot of the needles were twitching!

502ss 06-17-2008 05:05 AM

3 Attachment(s)
Removal of all wires from the boat! As you can see I removed the engines already, What a pain in the ass! Big Blocks are a tight fit!

502ss 06-17-2008 05:07 AM

2 Attachment(s)
more engine compartment pics

502ss 06-17-2008 05:16 AM

3 Attachment(s)
Fuel tank removal.....Westcoast you wern't kidding when you said it was a pain in the ass job! The only good thing for me I guess is the fuel leak was so bad that the Foam was fully saturated which meant it wasnt stuck to the tank anymore, After draining the tank then filling it with water, cutting part of the top off and then cutting it in half it came out pretty easily :rolleyes:


All times are GMT -5. The time now is 08:06 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.