Scarabman ,, Centerline prop height ?

Ha I just noticed it was really ON the beach

468 aluminum marine performer rpm head, B&M 250 blower at 9 lbs boost with water/meth injection, 2x QFT 850 carb, hyd. roller cam grind by Marine Kenetic. I never dynoed it but i think i am arond 750-800hp. Boat run at 80 mph gps std height bravo drive and lower, bravo 1 prop.

Yes we use tide to sit it on the beach and take some good time!

My prop height is at 7 3/8'' centerline, i am working to find some info to install an imco -1 or -2 on it, i dont know if is a good idea to do this on a single engine deep V

I didn't catch up to you at Jammin on the James Sunday morning you guys bolted. We are doing a small radar shoot in the same area this will be the 4th one it's more for single engine stern drives jets an outboards your Scarab and your friends Baja would be a good fit. Oct 25th Hopewell Va 11am to 4pm

[ATTACH=CONFIG]529494[/ATTACH][ATTACH=CONFIG]529497[/ATTACH][ATTACH=CONFIG]529498[/ATTACH][ATTACH=CONFIG]529499[/ATTACH][ATTACH=CONFIG]529500[/ATTACH][ATTACH=CONFIG]529496[/ATTACH]

My p29 http://i790.photobucket.com/albums/y...b164a3eb76.jpg

[IMG]http://i441.photobucket.com/albums/q...ps45e97992.jpg[/IMG]

http://i441.photobucket.com/albums/q...psd7e5c56c.png
http://i441.photobucket.com/albums/q...psf15357d6.png

Here's are latest project we are going to bring back to its glory days!!![ATTACH=CONFIG]530258[/ATTACH][ATTACH=CONFIG]530259[/ATTACH][ATTACH=CONFIG]530260[/ATTACH]

here it is when we just cleaned it after 15 years of setting in a yard in Georgia [ATTACH=CONFIG]530261[/ATTACH]