new Parts for 1999 Model Scarab 29 AVS
 

Hi,

Can anyone tell me where i can get Scarab New or Replacement parts for my 1999 Scarab 29AVS. I need the two engine vents, driver seat electric motor original bumper/ edgeing strip around the hull. Please email me on [email protected]

http://www.azboats.com.au/search/sea...sp?BoatID=6938

Never heard of a 29 AVS?

Side engine vents- do a search and have a set of aluminum ones made.

Rub rail molding buy a 100' roll through a marine supplier.

Hi ,

I am in Perth Western Australia and have nothing over here on the web that would do anything for high performance boats. If you could send me some web links of US based companys that might be able to supply some of the items that would be a great help. I have included a link to my actual boat. i bought it and shipped it to Perth.

http://www.azboats.com.au/search/sea...sp?BoatID=6938

are you talking about the actuator that raises and lowers the bolster seat? if so, pull the switch and check the connections and check the connections and fuse under the dash. mine was stuck in the up position and it turned out to be a bad crimp connection at the fuse.

good luck
jim

I am really struggling to get the new engine vents, do you have any Scarab dealers over there that you can recommend that might be able to help ?

I am looking for a steering wheel that has trim switches built in to it , any ideas ?

I am also looking for a supplier of Scarab grahics , any recommendations ?

wellcraft stopped making the sport scarab back in 2003 any parts you will need you will have to have them made I had new side vent made had to go to a machine shop to get them made took the old ones in so they could measure them I tried every were to find wellcraft scarab parts and had no luck
good luck with your search

I have a small marine rigging and upholstery company. I do custom work and one-off stuff. I also happen to have a 29 Scarab project boat.

I have powder-coated aluminum vents on mine. I could fab up another set if you like. PM me and I will send you some pics of what I have done.

Will be doing a complete interior job in a few months. Will have pics up on my website soon

Jamie

Would you be willing to make me an original looking year seat for my 98 29? I bought the boat as a repo and it was missing

Taco Marine was the OEM supplier for Wellcraft and Scarab for the rub rails: Http://tacomarine.com
As for the other parts you might want to contact :Flounderpounder Marine in Fla. they might have what you are looking for---- Jim


Flounder Pounder Marine -321-639-2951
255 Barnes Blvd.
Rock Ledge Fla. 32955
fpmarine.com