Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   Gauges for 96 Sprint (https://www.offshoreonly.com/forums/scarab/252026-gauges-96-sprint.html)

Mkemckenney 04-23-2011 07:57 AM

Gauges for 96 Sprint
 
I am looking to replace the Speedo & Tach on my 96 Sprint. Currently it has the stock Faria gauges. I am measuring them at 4 5/8 inches, does this sound right? I believe Wellcraft put them on their 22 & 26 ft Scarabs as well. They have a black and orange color scheme. Due to the faux molded carbon fiber dash I can't really go larger or smaller in terms of diameter. Any ideas on who makes gauges that will fit? I checked Faria's site and they don't appear to make this size anymore. I'm not really looking to spend a ton, just looking to get rid of the tach that has a cracked housing and bee trapped in it.

huge 04-23-2011 09:36 AM

They are more than likely 3 3/8" on the speedo and tach and 2 1/8" on the rest. These are the most common sizes of gauge and are measured at the dash cut-out diameter.

Monster gauges are typically 4 5/8" and 2 5/8" cut-outs

I think there are some oddball units out there that have 3 3/4" cutouts as well, but these are much less common

Try Hardin Marine. They have some really nice inexpensive kits.

Mkemckenney 04-23-2011 01:51 PM

Thanks huge, Just pulled out the Tach and it measures 4 3/8 accross the back, which seems like even more of an oddball. I've already bought a set of 3 3/8 I might try to find some bezel's to fill the gap.

kfm237 04-23-2011 02:12 PM

I went through the same thing with my Scarab 22 tach two years ago... Same gauges as on the 19 Sprint...
I called Faria and of coarse they don't make them anymore, just like you found out... but they told me they could repair the tach. I was lucky and got one off a member this the Scarab forum, who was upgrading to Autometer Guages.

Mkemckenney 04-23-2011 03:53 PM

I found some bezels from monster marine with a 3 3/8 ID and a 4 1/2 OD, so the 3 3/8 gauges should end up working out. If anyone needs the stock gauges pm me, the Speedo, trim, voltmeter, water temp, & fuel gauge are all in good working order.

matt1840 10-04-2011 08:24 PM

did those bezels ever work out???


im in the process of trying to find replacement gauges for my scarab 22 with no luck on 4 5/8" gauges. mt trim/fuel/ and water temp all busted... cant replace just 3 ya know?

pics would be great!!


All times are GMT -5. The time now is 02:29 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.