Scarab 43
#1
Registered
Thread Starter
iTrader: (4)
Scarab 43
So over the weekend I picked up a different boat that I will begin changing up a bit. It's a '94 Scarab Thunder 43, with the Alloy Composite Laminate, and a fully cored hull and deck. The boat came with triple SC600's and SSM 5 drives. I'm going to be converting this to a stagger, and put in my Quad Rotor 572's. With those I will be in the 1100-1200 hp range.
Here is a picture of it, and I will be posting more as I start in on this. If anyone is looking of a 38 KV, I am going to be selling that, with the Myco trailer, two set of hatches, arch, and all the other stuff I have for it. There is still a bit of work to be done on it, but all the hard stuff is mostly done.
Here is a picture of it, and I will be posting more as I start in on this. If anyone is looking of a 38 KV, I am going to be selling that, with the Myco trailer, two set of hatches, arch, and all the other stuff I have for it. There is still a bit of work to be done on it, but all the hard stuff is mostly done.
Last edited by endeavour32; 06-04-2018 at 08:51 PM.
#5
Registered
Thread Starter
iTrader: (4)
Sorry I haven't loaded more pictures of the boat yet. It's been a busy month. I did finally get the engines out, and sold the two used engines and plug in Hubers. Hopefully in the next few weeks I can get the boat down to my workshop in Indiana and start getting some work done on it. Here is a picture of it on the trailer, and dash, more pictures to come!