Offshoreonly.com - Search Results

Go Back  Offshoreonly.com > Search Forums
Reload this Page >

Search Results

Notices
Search: Posts Made By: mike tkach
Showing results 1 to 10 of 10
Search took 0.01 seconds.
Forum: General Q & A
07-01-2020, 08:06 PM
Replies: 12
Views: 340
Posted By mike tkach

being a four corner idle system you do need to...

being a four corner idle system you do need to open both front&back barrels evenly,if you leave the secondary closed it won,t idle worth a darn.if this is a new gen3 dominator it has an air bleed...
Forum: General Q & A
06-29-2020, 09:13 PM
Replies: 19
Views: 241
Posted By mike tkach

try bypassing the filter and see if the problem...

try bypassing the filter and see if the problem goes away.
06-27-2020, 01:54 PM
Replies: 13
Views: 492
Posted By mike tkach

the reason i asked who assembled it is i once had...

the reason i asked who assembled it is i once had a friend do his own assembly and he had the same issue you are having.when i took the engine apart i found that he had installed the 2nd compression...
06-26-2020, 09:41 PM
Replies: 17
Views: 733
Posted By mike tkach

as far as i know there is no kit but it can...

as far as i know there is no kit but it can easily be done,i have a boat with a 502 mag efi i am converting right now.you will need a carb,intake manifold,ignition system and a low pressure fuel...
06-09-2020, 07:49 AM
Replies: 160
Views: 25,669
Posted By mike tkach

i got a time out for calling out a member who...

i got a time out for calling out a member who sells all kind of used up junk on oso,he complained to a mod and i got a time out.that was the end of me being a paid member and i don,t give much advice...
Forum: General Q & A
05-12-2020, 10:42 PM
Replies: 40
Views: 1,952
Posted By mike tkach

you don,t want or need a large diameter hose,all...

you don,t want or need a large diameter hose,all you are doing is releasing air that gets trapped in the rear of the block.this is only needed on siamese blocks.
Forum: General Q & A
05-03-2020, 08:16 PM
Replies: 41
Views: 2,895
Posted By mike tkach

i have used the icon pistons in a few 502 builds...

i have used the icon pistons in a few 502 builds with good results,nice piston at a decent price.
Forum: General Q & A
11-06-2017, 09:28 PM
Replies: 58
Views: 6,622
Posted By mike tkach

new gen3 holley 1050 2 circut dominator and...

new gen3 holley 1050 2 circut dominator and edelbrock dominator single plane intake,i don,t remember the part number.
Forum: General Q & A
11-06-2017, 08:22 PM
Replies: 58
Views: 6,622
Posted By mike tkach

i misquoted when i said it was a crane 168741...

i misquoted when i said it was a crane 168741 cam,it is a 525 efi cam. everything is the same as the 168741 except the lsa,the 741 is on a 112 and the 525 cam is on a 114 lsa. although it made good...
Forum: General Q & A
05-18-2014, 12:08 AM
Replies: 14
Views: 2,348
Posted By mike tkach

maybe the injectors need to be cleaned,they can...

maybe the injectors need to be cleaned,they can be checked and cleaned fairly cheap.
Showing results 1 to 10 of 10


 
Forum Jump

OSO Sponsor
OSO Advertiser
OSO Advertiser
OSO Advertiser
OSO Advertiser
OSO Advertiser

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

OSO Advertiser