10-71 fitment??
11-14-2018 | 06:48 PM
#11
Registered
Joined: Nov 2005
Posts: 2,399
Likes: 15
From: Toronto, Canada
it doesn't matter who makes the blower, a 10:71 comes in different offsets, some bias towards the front some rearward, Danny's happen to be offset forward giving sufficient distributor clearance, ya gotta know this before assuming a 10 will clear
11-14-2018 | 08:09 PM
#14
Thread Starter
Registered
Joined: May 2010
Posts: 574
Likes: 0
From: Cedar Springs MI
Ya I talked with The Blower Shop today and they said their regular 10-71 will not clear a dizzy, but their front offset would. BDS uses a competition intake that moves the blower forward enough to clear the distributor. Littlefield didn’t want to take to much time to answer my questions but it sounds like their standard setup won’t clear either. TBS only sells a high helix 10-71 now and claims they take less power to turn and make more boost at lower rpm’s. BDS claims that there is no advantage to the high helix and will actually take more power to turn at my desired power levels. And they would not recommend the HH. So..... now I am confused???
11-15-2018 | 08:20 AM
#19
Registered
Joined: Aug 2003
Posts: 1,129
Likes: 32
From: Racine, Wisconsin
