How much wood could a woodchuck chuck if a woodchuck chucked a prop-blade?
#1
I can see why Fred leaves his boat on the trailer now. Its CUSTOM now baby, you can't even SPECIAL ORDER one like this:
Last edited by Sydwayz; 06-05-2005 at 11:16 PM.
#4
I felt a vibration as we were coming back into Deltaville, VA after the Rappahannock River Boaters Association Radar Shootout. DocManRich37 and his wife Jenn were with us, and MS was driving. As soon as we came off plane, what was remaining of the prop blade came off. It looks like it came loose and took one or two passes while still barely attached and pretty well chewed up the cavitation plate, annode, and pick-up for my drive shower.
Last edited by Sydwayz; 06-05-2005 at 11:20 PM.
#6
There is NO indication we hit ANYTHING. There is one ding on another blade, but I am pretty sure the ejected blade clipped it on the way to its new home. The enire lower is spotless. It appears to have just stress cracked and sheared its way off.
I have a replacement case in the garage already. Already shopping for props, lower is off the boat, and will be going to mechanic tomorrow for a once over, and gear/bearing swap to replacement case. I need to call Maxx Machine and get a new pick-up/hose. It could have been much worse. I was actually more pissed about losing my Oakleys earlier that day than this damage.
I have a replacement case in the garage already. Already shopping for props, lower is off the boat, and will be going to mechanic tomorrow for a once over, and gear/bearing swap to replacement case. I need to call Maxx Machine and get a new pick-up/hose. It could have been much worse. I was actually more pissed about losing my Oakleys earlier that day than this damage.
#8
Actually, the entire propshaft, lower (aside from cavitiation plate), and carrier bearing look, appear, and feel fine. They are still going in for a 100% once over.
I think I would have rather blown another damn trailer tire. This REALLY needs to be the end of bad $hit this season. I know others have it much worse than me, but its been something every trip.
I will put the old lower case up for sale after a bit. Its still good for a beater or work boat.
Stock 28P B1.
(Now looking for a LH 28P B1 Stock)
I think I would have rather blown another damn trailer tire. This REALLY needs to be the end of bad $hit this season. I know others have it much worse than me, but its been something every trip.
I will put the old lower case up for sale after a bit. Its still good for a beater or work boat.
Stock 28P B1.
(Now looking for a LH 28P B1 Stock)
Last edited by Sydwayz; 06-05-2005 at 11:15 PM.
#14
Expensive weekend for a number of boats that didn't even run the radar course. I've got some gelcoat work to do in a 2 x 5 ft area. Barry lost a anchor and lengthy 1/2 anchor line to the Rappahanock, and your losses.... Brian, I've seen you name here for awhile and was glad to meet a fellow OSO'er. Sorry about dunking you, When I realized you were trying to get the other rope (I thought it had already been done) I tried handing you my line again, then tried holding you onto my boat. It wasn't meant to be. That current was rolling!
#15
It was great to meet you and your family as well Russ. I feel for you. I was trying to save gelcoat and paint with my swan dive. I wish it would have worked better.
#16
Originally Posted by Sydwayz
It was great to meet you and your family as well Russ. I feel for you. I was trying to save gelcoat and paint with my swan dive. I wish it would have worked better.
I had to duck under a rope to get to the back of the boat and thought it was their rear line. When you and I did our little dance it became obvious there was a problem.
I'll keep an ear out for a prop...that sux!!!
#19
Dammit, it looks like the Skeg Eating Monster is heading north. Wasn't he in Richmond about a month ago?
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#21
Originally Posted by kennyo
Hoghead, I told you that prop wasn't made to haul fat chicks!
#23
Merc had a bad run of those props a couple years ago. There still showing up
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#24
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#25
Originally Posted by Strip Poker 388
Merc had a bad run of those props a couple years ago. There still showing up 

#26
Rich, thank you SO much! Do you need/want me to bring down Cassie this weekend? I just left my mechanic and HOPE TO BE on the water Friday night.
Last edited by Sydwayz; 06-06-2005 at 07:14 PM.
#27
Brian/Russ, sorry to hear your damage reports. I lost two trailers tires on the way home, and of course the coil getting there. Nonetheless, it was a great time.
Russ, see you this weekend at Harborfest. I've decided to run down Friday night and stay at Bluewater...
Russ, see you this weekend at Harborfest. I've decided to run down Friday night and stay at Bluewater...
__________________
Steve Gresham
'03 Donzi 33ZX
Steve Gresham
'03 Donzi 33ZX
#28
Ouch Steve! Keep going on those trailer tires! I am still one up on ya! I need a whole wall in the garage for all these 'trophies.'
#30
John, I TRULY appreciate your and www.offshore-performance.com 's efforts! When you get it done, just let me know. I don't have to have it Friday. You guys have spoiled me in the past. I hope BK bought you guys lunch as I provided for last time I shanked a drive.
Last edited by Sydwayz; 07-23-2005 at 02:56 AM.





