Gimbal Ring Repair Made Easy
#1
Gimbal Ring Repair Made Easy
I thought I would share with you my Gimbal Ring repair using Ron Benders method. http://www.jrmarine.com/
Ron also supplied the three wrenches needed.
The total project from start to finish took me 6 hours.
Ron also supplied the three wrenches needed.
The total project from start to finish took me 6 hours.
#4
Project completed.
NOTICE – if you buy parts remember to install them!
I bought a stainless U-bolt from Ron and forgot to put it in. I almost took it back apart but I had the clearance set by the time I noticed.
Overall a very good product and Ron was great to work with. I highly recommend using this product.
NOTICE – if you buy parts remember to install them!
I bought a stainless U-bolt from Ron and forgot to put it in. I almost took it back apart but I had the clearance set by the time I noticed.
Overall a very good product and Ron was great to work with. I highly recommend using this product.
#6
Registered
I used his kit too and I'm a believer!
The bellhousing and all the bellows & cable was intimidating but I had a member from here stop by my shop to give we a hand, THANKS JIM (32 caliber)!
The bellhousing and all the bellows & cable was intimidating but I had a member from here stop by my shop to give we a hand, THANKS JIM (32 caliber)!
Last edited by wowchad; 08-10-2007 at 02:05 PM.
#8
Registered
#9
Registered
Join Date: Jul 2007
Location: Tonganoxie, KS
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
So do you have to take drive and bellhousing off to do this? I am really sorry for all the dumb questions guys but thank you for taking the time to help. It is appreciated very much!
Brandon
Brandon