monza 24 redone
#1
Thread Starter
Registered
Joined: Jan 2006
Posts: 37
Likes: 3
From: Ceiba. Puerto Rico
Well after more than a year and working alone on this project its finally comming to an end. This boat was originaly outboard but I wanted to make it I/O. It needs a few weeks before water but its getting there... here the before pictures..
#7
Thread Starter
Registered
Joined: Jan 2006
Posts: 37
Likes: 3
From: Ceiba. Puerto Rico
Thanks for all the positive comments guys. It took allot of hours and still has some more to go like the rubrail, full sitdown seats"looking for advice on that", and the new trailer. Also Ron @ Imco has been a real gentelman for helping me on the parts I needed.
#9
Thread Starter
Registered
Joined: Jan 2006
Posts: 37
Likes: 3
From: Ceiba. Puerto Rico
Thanks Angel , Water testing is in 3 weeks. I hope for 70 , 75 or is this is a longshot? Engine has some work on it like head work and port matching. Drive is 1 5/8 over normal height. I have B1 propellers pitch 24 and 26 to test.


