Hell Ride 2
07-09-2008 | 08:59 PM
#1
Thread Starter
Registered
Joined: Oct 2006
Posts: 51
Likes: 0
From: Bay City, MI
Hell Ride 2
i bought this boat last year from marty. and im just now starting to get the proping dialed in. my question is are any of you familiar with the motor that is in this boat with the actual H.P. #s. im just curius so that it will help me get closer to my goal of getting this boat proped right.
regards john
regards john
07-14-2008 | 08:58 AM
#3
Platinum Member
Joined: May 2003
Posts: 176
Likes: 7
From: indpls. Indiana
Hi John,
This is Lori, Morry’s wife. Sorry we didn’t respond to your posting sooner. Morry had prostate cancer and had surgery to remove it last week, so he hasn’t been online. I’m glad to report he’s doing well.
He wanted me to tell you that the motor is 565 cu and if you can find one of his old postings, he listed the output from when he put in on a dyno. Forgive me if this reads a little rough, I don’t speak “motor” ;-).
Feel free to call him with any questions you have, he loves to talk about boats. And in the meantime, he’s going to see if he can find the dyno sheet and the specs on the cam.
Take care, and hope the boats running well!!!
Lori
317-849-4498 hm
This is Lori, Morry’s wife. Sorry we didn’t respond to your posting sooner. Morry had prostate cancer and had surgery to remove it last week, so he hasn’t been online. I’m glad to report he’s doing well.
He wanted me to tell you that the motor is 565 cu and if you can find one of his old postings, he listed the output from when he put in on a dyno. Forgive me if this reads a little rough, I don’t speak “motor” ;-).
Feel free to call him with any questions you have, he loves to talk about boats. And in the meantime, he’s going to see if he can find the dyno sheet and the specs on the cam.
Take care, and hope the boats running well!!!
Lori
317-849-4498 hm
07-14-2008 | 09:11 AM
#4
Registered
Joined: Dec 2003
Posts: 1,024
Likes: 0
From: Raleigh,NC & 1000 Islands,NY
Hi John,
This is Lori, Morry’s wife. Sorry we didn’t respond to your posting sooner. Morry had prostate cancer and had surgery to remove it last week, so he hasn’t been online. I’m glad to report he’s doing well.
He wanted me to tell you that the motor is 565 cu and if you can find one of his old postings, he listed the output from when he put in on a dyno. Forgive me if this reads a little rough, I don’t speak “motor” ;-).
Feel free to call him with any questions you have, he loves to talk about boats. And in the meantime, he’s going to see if he can find the dyno sheet and the specs on the cam.
Take care, and hope the boats running well!!!
Lori
317-849-4498 hm
This is Lori, Morry’s wife. Sorry we didn’t respond to your posting sooner. Morry had prostate cancer and had surgery to remove it last week, so he hasn’t been online. I’m glad to report he’s doing well.
He wanted me to tell you that the motor is 565 cu and if you can find one of his old postings, he listed the output from when he put in on a dyno. Forgive me if this reads a little rough, I don’t speak “motor” ;-).
Feel free to call him with any questions you have, he loves to talk about boats. And in the meantime, he’s going to see if he can find the dyno sheet and the specs on the cam.
Take care, and hope the boats running well!!!
Lori
317-849-4498 hm
07-17-2008 | 10:37 PM
#6
Thread Starter
Registered
Joined: Oct 2006
Posts: 51
Likes: 0
From: Bay City, MI
im so sorry to hear the terrible news you both will be in my prayers. thank you for the post ill give him a call after this weekend to talk a little bit about the boat and whats possible to do with it.
thank you again..............GET WELL MORRY
regards john
thank you again..............GET WELL MORRY
regards john
Thread
Thread Starter
Forum
Replies
Last Post
icanread
General Boating Discussion
5
09-03-2006 11:15 AM
bobby daniels
General Boating Discussion
15
07-14-2003 11:40 PM
