Anyone have experience buying new cockpit/interior from Fouintain?
#1
Guest
Posts: n/a
Now that I've committed to the new engines for the '84 10-Meter....I'd like to update cosmetics:
1) Firstly, can anyone rercommend a top quality upholstery shop near Westchester County, NY and how much $$ should I budget for a first class job?
2) May as well update the dashboard as well. Any suggestions on pricing and a shop to install new Gaffrig Monster gauges and throttles?
3) Finally, a complete paint job...any recommenations for a relatively conservative job ( I do like the photo's of the '04 42 ICBM that isposted here) ?
Thanks for all your help.
1) Firstly, can anyone rercommend a top quality upholstery shop near Westchester County, NY and how much $$ should I budget for a first class job?
2) May as well update the dashboard as well. Any suggestions on pricing and a shop to install new Gaffrig Monster gauges and throttles?
3) Finally, a complete paint job...any recommenations for a relatively conservative job ( I do like the photo's of the '04 42 ICBM that isposted here) ?
Thanks for all your help.
#2
a buddy of mine checked with Fountain on his 32' for the cockpit and hatch and they only wanted $12,000!
__________________
AUTOCONNECTIONLLC.COM
AUTOCONNECTIONLLC.COM
#4
I assume you will be finished with your mods for the upcoming season, if so, you may want to check out the thread below, be nice to have you join us. It's a reasonable tow or a long trip from Westchester! Hope to see you if possible.
GF
http://<br /> <a href="http://www.o...adid=65374</a>
GF
http://<br /> <a href="http://www.o...adid=65374</a>
Last edited by gferdon; 01-10-2004 at 02:34 PM.
#8
Ya wanted to up date myself but thought of the cost !and decided black was ok thinking of alternatives...got a cost from Gail Lane at fountain around $2900.oo dash and bezals and 1076.00 for chrome throttles steering wheel 70.00 Again (black is fine) .....
#9
Mshea...
You say you have invested in new engines. I make the assumption they are Merc's of some type and if new most likely are "Smartcraft" compatable. Why not lose all your gauges, with the exception of water pressure, have a new powdercoat dash plate made, mount the Smartcraft module (1K or less) and your GPS side by side for a super clean 21st century dash??? I have an 04 29 Fever and I kick myself for not working a deal with the factory for just such a setup. Just a thought.
G-
You say you have invested in new engines. I make the assumption they are Merc's of some type and if new most likely are "Smartcraft" compatable. Why not lose all your gauges, with the exception of water pressure, have a new powdercoat dash plate made, mount the Smartcraft module (1K or less) and your GPS side by side for a super clean 21st century dash??? I have an 04 29 Fever and I kick myself for not working a deal with the factory for just such a setup. Just a thought.
G-
Last edited by gferdon; 01-11-2004 at 11:20 AM.
#10
blownincome1,
Nisonger has some good prices on dash panels. They use Team Marine panels.
http://www.stores.yahoo.com/nisonger...ch-panels.html
If you need gages I'd contact Wally from the board.
Dan
BTW, I still have the faded out wheel on the boat. I haven't found a good replacement that will except the CRT.
Nisonger has some good prices on dash panels. They use Team Marine panels.
http://www.stores.yahoo.com/nisonger...ch-panels.html
If you need gages I'd contact Wally from the board.
Dan
BTW, I still have the faded out wheel on the boat. I haven't found a good replacement that will except the CRT.


