i need a case and veins for a bm 250, supercharger any help would be greatly appreciated on finding something that can be gone through these are not the easiest things to get parts for

Dave Wesseldyke at Wes Co might have some B&M 250 parts. 616-662-2250

I have a polished 250 complete if you are interested.

Gary

Your best bet is to try and find a complete used blower. We have gone through about all our used parts for the B&M 250 blowers. I believe we have a blower housing, but only one or two mis matched rotors. We can fit our 250 rotors in the B&M case, but it is a lot of machine work and requires new gears. It normally runs around $1200-1500 assuming your bearing plates and snout are good. All the parts have been discontinued for that blower, and the new Holley rotors and gears have been changed so they will no longer work in the older B&M blowers. If Gary has a polished blower, I would check it out.

Ron
The Blower Shop
661-299-5483

Dave has two of mine up there. One is good.