System 1 Filters
07-26-2005 | 08:35 PM
#2
SORE MEMBER
Joined: Apr 2004
Posts: 6,984
Likes: 1
From: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Re: System 1 Filters
http://www.system1filters.com/
I have run the 6" 30micron fuel sparating filters on a jet boat and my current boat over past 9 years. You can't beat them for flow. However the top o-rings can be a b***ch if you don't lube them before use. Also used their oil filters on stockcar type application.
I have run the 6" 30micron fuel sparating filters on a jet boat and my current boat over past 9 years. You can't beat them for flow. However the top o-rings can be a b***ch if you don't lube them before use. Also used their oil filters on stockcar type application.
Last edited by Wobble; 07-26-2005 at 08:43 PM.
07-27-2005 | 07:43 AM
#3
Registered
Joined: Mar 2004
Posts: 726
Likes: 10
From: Miami, FL
Re: System 1 Filters
We have our dyno set up with one and it's the best way to go you can take it apart after every session and inspect for debris wash it put it back together and start all over again no cutting filters and no filter explosions we have run over 100 psi on our methanol motors and never even a leak. Sincerely Laz Mesa
07-27-2005 | 10:46 AM
#4
SORE MEMBER
Joined: Apr 2004
Posts: 6,984
Likes: 1
From: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Re: System 1 Filters
Originally Posted by TRICK
Feel free to call me anytine about System One filters. I had one split open because of a casting failure. It destroyed a brand new custom engine. 
My dealings with the company after that were less than pleasant.
I wouldn't use one on my riding lawnmower.
My dealings with the company after that were less than pleasant.
I wouldn't use one on my riding lawnmower.
