Need 1 Merlin 310 head, #3003
08-03-2005 | 11:05 AM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 190
Likes: 2
From: Annapolis, Md
Need 1 Merlin 310 head, #3003
Anybody have a spare merlin 310 head, #3003??. Mine apparently have 113cc chambers (square int port) and I cracked one. Thanks................
Last edited by Hang Time 27; 08-03-2005 at 11:06 AM. Reason: spelling
08-04-2005 | 07:52 PM
#3
Gold Member
Joined: Jan 2001
Posts: 2,123
Likes: 1
From: Brooklyn Park, Md USA
Re: Need 1 Merlin 310 head, #3003
Hey Hangtime,
I found you a new head for $350.00. This is a brand new one with no machine work. You will need to do a valve job with your valves, mill to make cc's the same and to make sure its flat, cc the chambers and do bronze liners on the guides. That extra stuff should run you another $350-$400 on top of the head cost. If your old head is ported and you need the new head matched to that, that will be extra also.
Hope this helps!
Let me know if you are interested.
John
I found you a new head for $350.00. This is a brand new one with no machine work. You will need to do a valve job with your valves, mill to make cc's the same and to make sure its flat, cc the chambers and do bronze liners on the guides. That extra stuff should run you another $350-$400 on top of the head cost. If your old head is ported and you need the new head matched to that, that will be extra also.
Hope this helps!
Let me know if you are interested.
John
