MEFI-3 or MEFI-4?
08-09-2005 | 07:39 PM
#1
Thread Starter
Registered
Joined: Jul 2005
Posts: 3
Likes: 0
MEFI-3 or MEFI-4?
I am new to this site and have been lurking in the background for almost a month now. Very informative site with lots of good posts. Now for my problem. I own a 38 ft. cruiser (I know, I know) with twin 2001 454 MPI MAG Horizon engines. The engines ran great until my boat was struck by lightning 2 weeks ago. Luckily, we were not on the boat and the boat didn't sink. Both MEFI-3 ECM's are toast and I am told that these are no longer available for this engine. I am trying to determine if trying to find somebody (Whipple, Arizona Speed) to adapt the MEFI-4 for these stock engines makes sense or should I just find used or rebuilt MEFI-3 ECM's and forget about it. The stock program for these engines wasn't too bad and if I could find somebody to duplicate that or improve on it would be great. Thanks for your help. Mark
08-09-2005 | 08:02 PM
#2
Gold Member
Joined: Jan 2001
Posts: 2,123
Likes: 1
From: Brooklyn Park, Md USA
Re: MEFI-3 or MEFI-4?
I know that when an ASM kit is installed they have you install a new harness and a MEFI 4 ECM. I don't see why they couldn't be able to help you with that. Sounds kinda easy for them to do from what I have seen in there kits.
John S.
John S.
08-10-2005 | 06:04 AM
#6
Registered
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
08-10-2005 | 06:51 AM
#7
Thread Starter
Registered
Joined: Jul 2005
Posts: 3
Likes: 0
Re: MEFI-3 or MEFI-4?
Thanks for all the responses. I'll try cobra marty's approach first So far the insurance company has been fine to deal with but the going is slow trying to determine the extent of the damage. They tell me that once we receive the first round of parts more will surely need to be replaced. 800XCR, my e-mail address is [email protected]. I assume that getting the stock or improved program won't be a problem. Mark
So far the insurance company has been fine to deal with but the going is slow trying to determine the extent of the damage. They tell me that once we receive the first round of parts more will surely need to be replaced. 800XCR, my e-mail address is [email protected]. I assume that getting the stock or improved program won't be a problem. Mark
08-10-2005 | 07:09 AM
#8
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Re: MEFI-3 or MEFI-4?
Originally Posted by open72
call mark at precision , 504 469 7463 www.pmefi.com
Mark reflashed 1 for me and said he was getting ahold of all he could buy.
08-10-2005 | 05:29 PM
#10
Registered
Joined: Feb 2004
Posts: 230
Likes: 1
From: Catawba Is, Ohio
Re: MEFI-3 or MEFI-4?
i am a mercury dealer, get the serial numbers off your engines call your mercury dealer and he can get you mefi 4 update kits. or he can get you mefi 3 remans if still avalible. the reason they did away with mefi 3 is because gm wouldn`t make them anymore
