pair 500 hps
01-12-2006 | 02:47 PM
#6
Registered
Joined: Jan 2001
Posts: 2,292
Likes: 20
From: Grand River, Ohio
Re: pair 500 hps
The answers give you a low ball price.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
01-12-2006 | 04:40 PM
#8
Registered
Joined: Oct 2000
Posts: 532
Likes: 0
From: Fells Point MD
Re: pair 500 hps
The answers give you a low ball price.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.
01-13-2006 | 07:38 AM
#9
Thread Starter
Registered
Joined: Jan 2004
Posts: 707
Likes: 1
From: carolina shores
Re: pair 500 hps
Originally Posted by shawn
The answers give you a low ball price.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.
200 Hours for a carb means new valve spring at a minimum.
The salt will scare alot of people, as they will think the worst.
My opinion 4000-5000 with exhaust.
When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.
