trim pump testting question
03-29-2006 | 07:39 PM
#1
Thread Starter
Gold Member
Joined: Mar 2003
Posts: 2,376
Likes: 94
From: Grosse ile michigan
trim pump testting question
i need to know how to test a mercruiser trim pump to tell if they work or not,,,,what wires due i jump [email protected]
03-30-2006 | 08:50 AM
#2
Were doomed!
Joined: Oct 2000
Posts: 7,099
Likes: 1,397
From: Chicago, IL
Re: trim pump testting question
Are you looking to do this through the soleniods or just straight pump wires?
The pump should have a green/blue/black wires comeing out of the pump motor. Black is ground.....green should make the pump trim down....and blue wire will make pump trim up.
If the solenoids are on the pump...then look where the blue and green wires are hooked to and right next to that should be another post thats hooked to the power bus bar. (the 12v that comes from the battery) you can jumper across those two connection to make the pump go up and down....
The pump should have a green/blue/black wires comeing out of the pump motor. Black is ground.....green should make the pump trim down....and blue wire will make pump trim up.
If the solenoids are on the pump...then look where the blue and green wires are hooked to and right next to that should be another post thats hooked to the power bus bar. (the 12v that comes from the battery) you can jumper across those two connection to make the pump go up and down....
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
Thread
Thread Starter
Forum
Replies
Last Post
ratman
General Boating Discussion
5
01-26-2006 07:48 PM
