Fabricated/Sheet Metal Valve Covers - Where to get some?
06-19-2006 | 10:47 AM
#1
Thread Starter
Registered
Joined: Oct 2000
Posts: 113
Likes: 0
From: California
Fabricated/Sheet Metal Valve Covers - Where to get some?
I have been trying to get a pair, angle cut to clear Lightning headers. There is a place named Williams in Lake Elsinore ~ but apparently valve covers are not on their list of priorities and two motor guys I know have been unable to get a pair from them.
Any other sources? Thanks in advance
Any other sources? Thanks in advance
06-19-2006 | 12:27 PM
#2
Registered
Joined: May 2004
Posts: 1,218
Likes: 2
From: Blanchard, OK
Re: Fabricated/Sheet Metal Valve Covers - Where to get some?
Pick up a copy of National Dragster. I know they have a lot of custom advertisors in the back. Maybe find someone close to make you a set.
06-19-2006 | 04:53 PM
#3
Gold Member
Joined: Jan 2001
Posts: 2,123
Likes: 1
From: Brooklyn Park, Md USA
Re: Fabricated/Sheet Metal Valve Covers - Where to get some?
Moroso makes them also. Here are a few.
The top ones are Moroso and the bottom ones are Trick Flow.
Moroso's are running around $385.00 a set.
John S.
The top ones are Moroso and the bottom ones are Trick Flow.
Moroso's are running around $385.00 a set.
John S.
Last edited by Pwrbt33; 06-19-2006 at 05:01 PM.
06-19-2006 | 06:05 PM
#4
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 5
From: Rochester, NY
Re: Fabricated/Sheet Metal Valve Covers - Where to get some?
Craig,
Billet Fabrications makes an excellent line of S/M covers. I spoke to them at PRI about custom marine BBC valve covers w/spring oilers.
http://www.billetfab.com/index.htm
Bob
Billet Fabrications makes an excellent line of S/M covers. I spoke to them at PRI about custom marine BBC valve covers w/spring oilers.
http://www.billetfab.com/index.htm
Bob
Last edited by rmbuilder; 06-19-2006 at 07:13 PM.
