Labb Prop
07-31-2006 | 08:06 AM
#1
Thread Starter
Registered
Joined: Mar 2004
Posts: 205
Likes: 0
Labb Prop
I know it should be in another section but i think more people would see it here. I am running a 24 bravo1 labbed by hydromotive. before labbing the 24 the boat would not i call torque lean over to the one side when cruising and would not slip when coming on plane or porpose. After labbing it does all of these, actually it kind of runs like I have my mirage 23 on it but without the top-end and hole-shot. With the bravo 1 WOT is 5000rpm; 23mirage WOT is 5450rpm. So i try a mirage plus or another 4 blade?
07-31-2006 | 02:05 PM
#2
Registered
Joined: Aug 2005
Posts: 8,779
Likes: 1
From: HOUSTON ,TX
Re: Labb Prop
Originally Posted by k24u
I know it should be in another section but i think more people would see it here. I am running a 24 bravo1 labbed by hydromotive. before labbing the 24 the boat would not i call torque lean over to the one side when cruising and would not slip when coming on plane or porpose. After labbing it does all of these, actually it kind of runs like I have my mirage 23 on it but without the top-end and hole-shot. With the bravo 1 WOT is 5000rpm; 23mirage WOT is 5450rpm. So i try a mirage plus or another 4 blade?
Thread
Thread Starter
Forum
Replies
Last Post
Chris288
Sunsation
1
09-28-2004 04:13 PM
MIKEHTMSR24
General Boating Discussion
3
07-22-2002 03:18 PM
