Intake Manafold
10-01-2006 | 03:58 PM
#1
Thread Starter
Registered
Joined: Jul 2003
Posts: 716
Likes: 5
From: Annapolis, MD
Intake Manafold
What would be the best intake manafold for a 420HP? I had a Dart Intake manafold but it was for an engine that had a higher RPM range then the 420HP. The max RPM I have is 5000. Thanks
10-01-2006 | 04:42 PM
#4
Thread Starter
Registered
Joined: Jul 2003
Posts: 716
Likes: 5
From: Annapolis, MD
Re: Intake Manafold
Originally Posted by mrhorsepower1
I would recomend a Edelbrock Performer RPM.
10-01-2006 | 06:37 PM
#5
Banned
Joined: Feb 2005
Posts: 1,459
Likes: 1
From: Cleveland, Ohio
Re: Intake Manafold
If it's fresh water you will be alright. Salt water of course will take it's toll without fresh water flushing. That intake being a raised runner dual plane will give you the best torque curve for you combination. A upgrade camshaft grind will also help.
10-01-2006 | 10:27 PM
#6
Banned
Joined: Sep 2001
Posts: 25,191
Likes: 0
From: Deland, Florida
Re: Intake Manafold
The Merlins on my 420's work great.
http://www.zippyvideos.com/683233795...6/7-25-05_008/
http://www.zippyvideos.com/683233795...6/7-25-05_008/
Last edited by cuda; 10-01-2006 at 10:29 PM.
10-01-2006 | 10:31 PM
#7
Banned
Joined: Sep 2001
Posts: 25,191
Likes: 0
From: Deland, Florida
Re: Intake Manafold
Originally Posted by gripit
How would an Edelbrock Performer RPM hold up in marine conditions? I was told Dart makes some with Merlin Brass coated water jackets.
