Toe in n Toe out?????
10-06-2006 | 07:53 PM
#2
SORE MEMBER
Joined: Apr 2004
Posts: 6,984
Likes: 1
From: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Re: Toe in n Toe out?????
from what I have seen on this subject, the correct measuring points are from center to center on the nosecones and center to center on the prop shafts
10-07-2006 | 06:54 AM
#3
Registered
Joined: May 2005
Posts: 201
Likes: 0
From: Haymarket and SML, Va.
Re: Toe in n Toe out?????
Originally Posted by Wobble
from what I have seen on this subject, the correct measuring points are from center to center on the nosecones and center to center on the prop shafts
10-07-2006 | 07:43 AM
#4
Thread Starter
AKA NoMoBoatin
Joined: Jan 2003
Posts: 3,684
Likes: 0
From: Can't remember.
Re: Toe in n Toe out?????
Originally Posted by 88Fountain
What he said. Also, mine are 1/8" toe in and my props spin outward.
10-07-2006 | 12:58 PM
#9
Thread Starter
AKA NoMoBoatin
Joined: Jan 2003
Posts: 3,684
Likes: 0
From: Can't remember.
Re: Toe in n Toe out?????
Just got back from testing my old max machine 1.50s and as i said i lost 10 mph with the bmaxs.Here are a few pics of the garmon gps.I ran 5800 rpms and had a little throttle left.Dustin set the rev limiter to 6400 but i don't want to turn that high.What is a safe rpm at woft can i run ? I was thinking 6000 on the 525's.
