New Yamaha 350 Outboard?
04-26-2007 | 11:32 AM
#1
Thread Starter
Registered
Joined: Nov 2000
Posts: 6,306
Likes: 1
From: Lake Lanier - N. Georgia
New Yamaha 350 Outboard?
What do you guy's know about this new engine? We had a staff meeeting this morning , we have decided to build a 38 CC. The bottom plug is sitting at the shop and we'll be working on the deck / liner soon. Can't wait!
http://www.lake-link.com/info/pressr...sReleaseID=137
http://www.lake-link.com/info/pressr...sReleaseID=137
04-26-2007 | 03:16 PM
#7
Registered
Joined: Jan 2005
Posts: 3,232
Likes: 1
From: Wi/ Fl Keys
04-26-2007 | 07:34 PM
#9
Registered
Joined: Nov 2006
Posts: 429
Likes: 0
From: Mentor , Ohio
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot
.... Brian , I will be following this very closely !
Whats you expected first build date ?
.... Brian , I will be following this very closely ! Whats you expected first build date ?
04-26-2007 | 07:37 PM
#10
Thread Starter
Registered
Joined: Nov 2000
Posts: 6,306
Likes: 1
From: Lake Lanier - N. Georgia
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot .... Brian , I will be following this very closely ! Whats you expected first build date ?
.... Brian , I will be following this very closely ! Whats you expected first build date ?I'm waiting on quotes now from several tooling companies. Early 08 for sure! We're going to offer some " BLOWOUT" deals to help pay for the tooling. I'll keep you posted.
