Going to put on a "new" Bravo outdrive. I need to transfer the IMCO steering end cap from the old to the new drive. I still have all the drill and tap gear but does anyone have the instruction for the installation of the cap?
Thanks

I did the same thing last year and I called Imco and not only did they send me directions but they sent a special stepped drill bit so you dont drill do deep.I also hammered a nut onto the end of my tap so I could turn it with a rachet and it worked out great.I drilled and tapped the holes with the caps installed in place so no metal would get into the drives.Let me know if you have any trouble getting the bit,I think I still have it.

Nordic95

Thanks Nordic95. The cap is sitting on the drive now.