help again please
08-07-2007 | 08:06 PM
#1
Thread Starter
Registered
Joined: May 2005
Posts: 989
Likes: 3
From: Lake Oswego OR
help again please
Hi again guys,
I had great advice earlier today diagnosing my blown head gasket, but how in the heck do I determine what Generation of motor I have? (Gen IV, V or VI). I have 10 bolts on the timing cover and 16 head bolts. No discernible stamping numbers on block or head. Heads are rectangular port, hi-perf. Thanks in advance. - Jeff
I had great advice earlier today diagnosing my blown head gasket, but how in the heck do I determine what Generation of motor I have? (Gen IV, V or VI). I have 10 bolts on the timing cover and 16 head bolts. No discernible stamping numbers on block or head. Heads are rectangular port, hi-perf. Thanks in advance. - Jeff
08-07-2007 | 10:05 PM
#2
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 4
From: Rochester, NY
08-08-2007 | 10:00 AM
#4
Thread Starter
Registered
Joined: May 2005
Posts: 989
Likes: 3
From: Lake Oswego OR
so it seems that i have genIV? no raised lifter bosses and my block looks like the top right picture in the other thread, rm. and i have the block attached mechanical pump. any last opinions? - jeff
