Propshaft dyno in Michigan?
08-21-2007 | 12:33 PM
#5
Registered
Joined: Oct 2000
Posts: 1,382
Likes: 3
From: Spicewood, Texas USA
I have one in Texas. I can dyno up to 800 prop shaft HP. There are very few quality prop shaft dynos around. Most are just for putting a load on the drive for trouble shooting and don't have data acquisition capabilities.
08-21-2007 | 02:56 PM
#7
Thread Starter
Registered
Joined: Feb 2005
Posts: 4,400
Likes: 25
From: Michigan
I am starting to realize that they are few and far between. Unfortunately you are a LONG way from me!
Last edited by onesickpantera; 08-21-2007 at 02:59 PM.
08-21-2007 | 02:59 PM
#8
Thread Starter
Registered
Joined: Feb 2005
Posts: 4,400
Likes: 25
From: Michigan
08-21-2007 | 03:15 PM
#9
Registered
Joined: Nov 2005
Posts: 635
Likes: 2
From: cincinnati ohio
08-21-2007 | 04:22 PM
#10
Registered
Joined: Oct 2000
Posts: 1,382
Likes: 3
From: Spicewood, Texas USA
Land & Sea. I've got the dual rotor absorber with Dynomax 2000 acquisition software.
http://www.land-and-sea.com/prop-sha...arine-dyno.htm
http://www.land-and-sea.com/prop-sha...arine-dyno.htm
