Thanks JC, Wicked, Dukes, Enforcer and a few sweep boats.
08-28-2007 | 09:12 AM
#1
Thread Starter
Charter Member
Joined: Oct 2000
Posts: 1,353
Likes: 0
From: richmond virginia
Thanks JC, Wicked, Dukes, Enforcer and a few sweep boats.
Boat dies at the ramp. JC (thank you) jumped in bilge diagnosed electrical problem, retaped all wires to MSD box. Boat Died on the race course heading to milling. Sweep boat (thank you) gets me a new coil from who knows where while being towed by another sweep boat (thank you). Boat runs great then dies at milling area, towed in by Dukes (thank you). Jay Muller (thank you) from Wicked brings us a MDS box
from his trailer but with no plugs. Dan (thank you) from Enforcer jumps in and helps wire the whole thing up, all this took place during race delay. We ran the whole race with no problems other than breaking out, (no rev chip to 2nd MSD box), I just wanted to thank you all for helping Mark and I get in the race.
Eddie
I will post picture of new MSD bracket soon
from his trailer but with no plugs. Dan (thank you) from Enforcer jumps in and helps wire the whole thing up, all this took place during race delay. We ran the whole race with no problems other than breaking out, (no rev chip to 2nd MSD box), I just wanted to thank you all for helping Mark and I get in the race.
Eddie
I will post picture of new MSD bracket soon
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
08-28-2007 | 09:40 AM
#2
Easily Distracted
Joined: Sep 2004
Posts: 22,942
Likes: 2
From: Bucyrus, Ohio
You gotta love racers!!! I felt so bad for you guys when I saw Dukes towing you in and then later I almost got a good shot of the two of you racing. Glad you guys made it out! See you in Point Pleasant 
__________________
Bad Girls Make Good Company
Bad Girls Make Good Company
Don't tell me your starting to take after Randy.....
08-28-2007 | 12:24 PM
#6
VIP Member
Joined: Sep 2002
Posts: 7,954
Likes: 3
From: ID
Nice! It's one of those JC Perf designs!
(I'm gonna pay for that remark.)
(I'm gonna pay for that remark.)
08-28-2007 | 02:38 PM
#7
Registered
Joined: Jul 2004
Posts: 8,908
Likes: 9
From: Long Island,New York
08-28-2007 | 05:53 PM
#9
Registered
Joined: Apr 2004
Posts: 4,509
Likes: 3
From: Emerald Isle, North Carolina
Boat dies at the ramp. JC (thank you) jumped in bilge diagnosed electrical problem, retaped all wires to MSD box. Boat Died on the race course heading to milling. Sweep boat (thank you) gets me a new coil from who knows where while being towed by another sweep boat (thank you). Boat runs great then dies at milling area, towed in by Dukes (thank you). Jay Muller (thank you) from Wicked brings us a MDS box
from his trailer but with no plugs. Dan (thank you) from Enforcer jumps in and helps wire the whole thing up, all this took place during race delay. We ran the whole race with no problems other than breaking out, (no rev chip to 2nd MSD box), I just wanted to thank you all for helping Mark and I get in the race.
Eddie
I will post picture of new MSD bracket soon
from his trailer but with no plugs. Dan (thank you) from Enforcer jumps in and helps wire the whole thing up, all this took place during race delay. We ran the whole race with no problems other than breaking out, (no rev chip to 2nd MSD box), I just wanted to thank you all for helping Mark and I get in the race.
Eddie
I will post picture of new MSD bracket soon
