My 91' 292 was special ordered from Formula with the 502's. One of the boots had a small split in it and for time purposes I just put 2 new drives on (rather than wait 3 weeks for the rebuild). I put new exhaust on at the same time and a few other things. Sat the old drives in the corner of my mechanics shop and they have sat there for a year. Wanting to get rid of them, I posted on them in the swap shop. Pulled them out last weekend to clean them up and take pics. Surprising to me, the drives were marked as 1.36 ratio as opposed to 1.50. Both myself and my mechanic figured they were 1.50 (which is what the new drives are).

So, to get to the question. Is anyone else with a similar setup have 1.36 or 1.50 and what was originally put into your boat? I have all the original paperwork with the boat, manuals, canvas bags, delivery papers, tank test, and nothing about the boat being produced with 1.36 ratio.

P.S. I have since modified the ad.Bravo I's 1.36 Ratio