Go Back  Offshoreonly.com > Race Talk > General Racing Discussion
Want To See What Leverage Boat Polish Does? >

Want To See What Leverage Boat Polish Does?

Notices

Want To See What Leverage Boat Polish Does?

Thread Tools
 
Old 09-22-2007 | 08:27 PM
  #1  
racesdad's Avatar
Thread Starter
Registered
 
Joined: Mar 2002
Posts: 3,392
Likes: 7
From: racing capitol of the world
Default Want To See What Leverage Boat Polish Does?

Here Are Pics Of A 1988 24 Baja That Is Sitting At A Dealership Here In Indy. I Was Doing A Demo For This Dealer. This Spot Was Done 2 Months Ago In The Lot. The Boat Side Face South And Get Punished By The Sun. The Date On The Pic Is Wrong I Will Add. It Was Taken This Morning. Leverage Polish Oxidation Remover At It Best On A Worst Case Color.
Mike
Attached Thumbnails Want To See What Leverage Boat Polish Does?-s4020625.jpg   Want To See What Leverage Boat Polish Does?-s4020627.jpg  
racesdad is offline  
Reply
Old 09-23-2007 | 05:50 AM
  #2  
Registered
 
Joined: Sep 2007
Posts: 2,571
Likes: 0
From: Gaylord, Mi
Default

Honestly I am not too impressed. I spent a couple hours this summer removing oxidation from my 1987 four winns with my rotory buffer and it looks at least this good if not better.

Maybe the pics dont show the effect as much as in person.

Sorry for the neg post I am just being honest.
drpete3 is offline  
Reply
Old 09-23-2007 | 08:38 AM
  #3  
marineclean's Avatar
Registered
 
Joined: Sep 2006
Posts: 1,442
Likes: 0
From: Closer than you might think..........
Default

Hi drPete,

I believe Mike did this by hand with a quick wipe on/off. I agree with the pic that it's kind of hard to see. I'll post some up.

Donnie
Attached Thumbnails Want To See What Leverage Boat Polish Does?-s7000333.jpg   Want To See What Leverage Boat Polish Does?-s7000364.jpg   Want To See What Leverage Boat Polish Does?-s7000365.jpg  

marineclean is offline  
Reply
Old 09-23-2007 | 08:48 AM
  #4  
marineclean's Avatar
Registered
 
Joined: Sep 2006
Posts: 1,442
Likes: 0
From: Closer than you might think..........
Default

Here's a couple more........

The first pic above is a side shot of a SeaRay that I only had to Polish.

The three below that are older 420s that I've buffed back to life then polished.

The newer SeaRay below them had spent quite a bit of time exposed, so oxidation was pretty bad halfway up. Not anything that couldn't be cured with a little elbow.

I think the last one speaks for itself.
Attached Thumbnails Want To See What Leverage Boat Polish Does?-s7000366.jpg   Want To See What Leverage Boat Polish Does?-s7000367.jpg   Want To See What Leverage Boat Polish Does?-s7000260.jpg  

marineclean is offline  
Reply
Old 09-23-2007 | 09:52 AM
  #5  
racesdad's Avatar
Thread Starter
Registered
 
Joined: Mar 2002
Posts: 3,392
Likes: 7
From: racing capitol of the world
Default

Originally Posted by drpete3
Honestly I am not too impressed. I spent a couple hours this summer removing oxidation from my 1987 four winns with my rotory buffer and it looks at least this good if not better.

Maybe the pics dont show the effect as much as in person.

Sorry for the neg post I am just being honest.
that was done by hand in seconds not minutes.
racesdad is offline  
Reply
Old 09-24-2007 | 09:55 AM
  #6  
Registered
 
Joined: Sep 2007
Posts: 2,571
Likes: 0
From: Gaylord, Mi
Default

OK, Now maybe I am impressed.

Wait though, this stuff isnt like poly glo is it? Guess I am just sceptical of things that say they are easy.
drpete3 is offline  
Reply
Old 09-24-2007 | 11:38 AM
  #7  
marineclean's Avatar
Registered
 
Joined: Sep 2006
Posts: 1,442
Likes: 0
From: Closer than you might think..........
Default

LOL Drpete.

No, I'm not like a seen on TV or buy these four products, start with this then do that, but don't do this.

Leverage Polish is very simple to apply, very easy to maintain and the Shine speaks for itself. I made the Oxidation Remover to be your one step cleaner before you polish. It will work as your hull cleaner, black streak remover, transom, oxidation of course and any other imperfections.

I've also made sizes just for those who want to give it a try first. If you visit my website you will see that I offer my Polish, Metal Serum & Oxidation Remover in sample sizes for 4.95.

Let me know if you need anything. I also have a lot of threads in the Fiberglass/Paint section.

Thanks, Donnie
marineclean is offline  
Reply
Old 09-24-2007 | 01:55 PM
  #8  
racesdad's Avatar
Thread Starter
Registered
 
Joined: Mar 2002
Posts: 3,392
Likes: 7
From: racing capitol of the world
Default

i left this facing the sun for 1.5 months. now what do you think?
this is the real deal. we were too. i have demoed different bottles at every dealer just to sell myself on the stuff. it worked on my 73 sl450 benz with original paint too. looks like new for the last 4 months
mike stancombe
racesdad is offline  
Reply
Old 09-24-2007 | 02:29 PM
  #9  
crb76's Avatar
Platinum Member
 
Joined: Jul 2005
Posts: 1,148
Likes: 17
From: Houston, TX
Default

I just wish Trick Marine would send me mine. I only ordered it 5 months ago. It could be the greatest thing in the world for all I know ................

If someone wants to make it right, feel free to give me a call.

Clark
713-540-0171

Last edited by crb76; 09-24-2007 at 09:17 PM.
crb76 is offline  
Reply
Old 09-24-2007 | 05:27 PM
  #10  
Pete B's Avatar
Charter Member#203
Community Builder
Veteran: Navy
25 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 21,260
Likes: 19,865
From: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Default

The stuff all works great, If your having problems recieving your product , send Donnie a PM see if he can help you directly.
Pete B is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.